ITW Red Head WS-1254 1/2" x 5-1/2" Trubolt Carbon Wedge Anchor 25 Per Box

ITW Red Head WS-1254 1/2" x 5-1/2" Trubolt Carbon Wedge Anchor 25 Per Box

ZINC Plated for indoor use BIT SIZE 1/2" Thread Length 4" Dot not use in vibratory loads Packaged with zinc plated nuts and washers

Applications
The 1/2" x 5-1/2" Trubolt Wedge Anchor is made from Carbon Steel, and is Zinc Plated. This anchor is designed for use in concrete only, and should never be used in block or brick base material.

Environment
The anchor is designed for use in a dry environment.

Hole Diameter/Bit Diameter



The anchor requires a 1/2" hole to be drilled in the base material (concrete only). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill.

Diameter of Anchor
The diameter of the 1/2" x 5-1/2" Trubolt Wedge Anchor is 1/2".

Length Anchor
The length of the anchor is 5-1/2", and is measured as an overall length of the anchor from end to end.

Thread Type
The threads on the anchor are national coarse threads that measures 1/2" with 13 threads per inch, commonly referred to as 1/2"-13.