PTFE Sheet Stock (Ultra Pure Virgin PTFE) / 1/32" Thick / (12" x 12" Sheet)

PTFE Sheet Stock (Ultra Pure Virgin PTFE) / 1/32" Thick / (12" x 12" Sheet)

Virgin PTFE Manufactured in the United States These sheets are manufactured in the United States from non-stick, virgin PTFE and are used as a top for workbenches, industrial gaskets, wear surfaces, drainboards, sinks, and shelf liners. They are non-porous and non-absorbent and therefore will not retain odors. PTFE has a temperature range of -320°F to +500°F. The PTFE sheets from 1/32” to 1/4" meet AMS 3652 for skived film and sheets, from 3/8” to 1” are molded and manufactured to meet AMS 3667 Type 2 for non-critical. If a cert is required to meet this AMS specification, material must be purchased and sent to an independent lab for testing and x-rays, at an additional cost. These sheets also meet USDA 21CFR 177.1550and UL94. To bond non-etched PTFE, you must spray and wipe off the surface to be bonded with SCI Cat.# PP-50 Poly-primer surface conditioner. Use SCI Cat.# RBRC-32 Rubber Cement for semi-permanent and SCI Cat.# GSI-100 for permanent bonds. No surface conditioner is required if you use our One-sided Etched PTFE sheets. Contact us for custom sizes and larger quantities.