PID Temperature Controller with Dual Alarm Outputs, Relay Output, SYL-2342

PID Temperature Controller with Dual Alarm Outputs, Relay Output, SYL-2342

PID control with fuzzy logic enhancement for the best stability control 0.2% accuracy over the entire input range Auto/manual control with bump less transfer Dual alarm outputs with more than ten ways to activate 10A/120V dry relay output can drive small load or external mechanical relay/contactor. Note: This controller cannot drive a typical DC-trigger-AC SSR. Note: The model for this listing is SYL-2342 (relay output). For SYL-2352 (SSR output), please see: https://www.amazon.com/dp/B017MO04X4/

This is a brand new, dual display, 1/16 DIN size (1.89x1.89" or 48 x 48 mm) temperature/process controller. Common applications of this controller include controlling the temperature of industrial equipment, laboratory equipments, espresso machine, beer brewing system, BBQ grill and smoker, heat treatment oven, glass kiln, and aquarium.

The controller use advanced artificial intelligence enhanced PID algorithm that can handle system that is sluggish or difficult to control by the traditional PID controller. In most cases, the controller will hold the temperature within a reasonable range with the default PID parameters. The auto-tune feature will further improve control accuracy and stability to within one degree of accuracy. In most cases, there is no need for user to play the confusing PID parameters in order to get the system stabilized.

This high precision, full featured industrial grade controller supports more than twenty different input devices that cover almost every possible application requirement. Two alarm outputs can be activated by more than 10 situations. All the control and setting parameters are stored in the non-volatile memory that will not be lost when powered off.

One of the unique features for this controller is that the built-in relay can handle 10 A of current at 120VAC. That means 1200 watts of load can be connected directly to the controller without the need of an external relay or SSR. That is a very convenient for applications that only a small heater is used.

Supported sensor type:
TC: K, E, S, WRe, J, T, B, N
RTD: Pt100, Cu50, 0-80 ohm, 0-400 ohm.
Overall dimension: 48 x 48 x 107mm.
Depth after mounting panel is 100mm.

Manual: goo.gl/WOxOAe