38mm Internal Electric Fuel Pump with Strainer 80LPH 3.0BAR Universal FIT Gasoline Only 12V Hardware

38mm Internal Electric Fuel Pump with Strainer 80LPH 3.0BAR Universal FIT Gasoline Only 12V Hardware

Universal FIT for gasoline vehicles requiring a 38mm diameter internal pump unit. Specifically engineered for standard 12V DC systems with an 80L/H flow rate at 3.0 BAR (43.5 PSI). Verify your original pump's physical dimensions and strainer orientation before purchase. This internal pump unit integrates a turbine impeller and a carbon-brush motor treated for environmental exposure to standard gasoline additives. The assembly includes a multi-layer nylon strainer to maintain a closed-loop fuel delivery interface within the fuel hanger module. Designed to address erratic fuel pressure feedback and signal lag in the fuel monitoring circuit. By providing consistent 3.0 BAR pressure stability, this hardware restores factory-specified fuel delivery characteristics and maintains proper engine geometry for combustion stability in naturally aspirated applications. The hardware housing undergoes cycles tested validation for thermal expansion stability and acoustic decibel limits. Each unit is precision-engineered to match factory electrical load limits, ensuring a direct-fit integration with the existing 12V wiring harness without excessive heat buildup. Professional installation is required; modification of the original fuel module bracket or wire splicing may be necessary. Do not use with E85, Diesel, or Ethanol-rich fuels to prevent seal deformation. Replaces standard 38mm pump cores including industry-style E8213-type hardware.

Physical Specification & Application Matrix (Gasoline ONLY):
FIT 12V In-Tank Fuel Systems requiring 38mm (1.5 inch) diameter pump hardware.
Flow Rate: 80 LPH (Liters Per Hour) @ 3.0 BAR (43.5 PSI) Constant Pressure.
Operating Voltage: 12V DC / Operating Current: ≤ 5.0 Amps.
Note: Recommended for small displacement naturally aspirated engines only.

Technical Specifications & Physical Evidence:
Pump Type: Electric Turbine Internal Unit.
Body Diameter: 38mm / Connector Type: Universal Spade/Pin Adapter.
Kit Components: 1x Internal Pump, 1x Nylon Strainer, 1x Universal Wiring, 1x Rubber Insulator.
OE Style Interchange: Replaces multiple 38mm core units (Check dimensions).

Technical Installation & Service Protocol:
This fuel pump core is a precision-calibrated hardware component. Prior to integration, thoroughly clean the fuel tank to protect the 40-micron nylon strainer from sediment contamination. Ensure the internal rubber insulator is seated correctly to maintain acoustic decibel limits. Modification to the plastic fuel hanger or connector pins may be required to maintain proper signal geometry and pressure integrity. Not for use with E85 or Diesel.