TIKROUND Youngtown High Torque Long Shaft Clock Movement Mechanism with 12 Inch Long Spade Hands

TIKROUND Youngtown High Torque Long Shaft Clock Movement Mechanism with 12 Inch Long Spade Hands

Clock movement replacement: high torque clock with 2 hooks, long shaft, drive long clock hands (10 mm to 450 mm). Movement size: Total shaft length is 23 mm (29/32 inch), thread length is 12mm (15/32 inch),suitable for 4 - 8 mm (5/ 32 - 5/16 inches) thickness clock panel. Size from the hole center to the tip: the hour hand is approx. 203 mm/ 8.0 inches long; The minute hand is about 305 mm/ 12 inches in length. DIY clock supplies: the complete clock movement kit is suitable for repairing or making a clock, serving as good replacements for large and thick clock frames. Warm notice: when you install them, please keep the hour hand and minute hand parallel; And please do not use too much pressure to avoid bending them. Features:
Kindly note:
This clock Mechanism can not install the second hand.

Easy and simple design
Suitable for repairing, replacing or making a clock
Material: plastic and aluminum
Second hand motion: Step
Accuracy Within ±30seconds deviation each month (in normal temperature)
Battery: one 1.5V Carbon-zinc batteries only,not included.
Please DO NOT USE Alkaline battery,Rechargeable batteries,they will damage the movement.

Dimensions:

Case size: approx. 56 x 56 x 16 mm (2.2 x 2.2 x 0.65 inches)
Total hour hand length: approx. 216 mm (8.5 inches)
Total minute hand length: approx. 385 mm (15.2 inches)
Second caps: approx. 7 mm (0.3 inches)

Package included:

1 x Quartz clock movement
1 x Second close nut
1 x Minute hand
1 x Hour hand
1 X Plastic washer
1 X Brass washer
1 X Brass nut
1 x Metal hook