InstallerCCTV Video Quad Color 4CH Multiplexer 2 BNC Output with Remote Control and Free 1Amp Power Adapter…

InstallerCCTV Video Quad Color 4CH Multiplexer 2 BNC Output with Remote Control and Free 1Amp Power Adapter…

Color quad system 4 channel multiplexer; Video lost detection, motion detection Full quad display at real-tme refresh rate; PIP and auto sequence Camera title, time and date display for easy identification, 4 Channel BNC input and 2 Video BNC outputs Free 1A Power Adapter and remote control Included 1Pc CR2025 Button battery included, 3V, 150mah. Note: Support analog cameras only. Video Standard: PAL: 50 fields/sec; NTSC: 60fields/sec
Definition: NTSC: 720 x 480; PAL: 720 x 576
Video Input: 1.0Vp-p75 ohm
Tape Input/Output : 1.0Vp-p75 ohm
Border Color: Black, Gray, White, Off Selection
Video Input Mode: Full Screen, electronic amplifying, Quad, PIP and Auto Sequence
Working Voltage: DC12V/1A
Camera Set Up
Brightness Contrast Struration Hue Sharpness is adjustable brightness, contrast, hue and sharpness. Mirroring is the photo setting mode. When the setting is selected to be ON, the inputsignal will be displayed in with contrast direction. The default setting is OFF.
Motion Setup:
DETECTION TIME is the switch setting of the detecting time and it is available when the setting in the state of “ALWAYS ON”
SENSITIVITY means the sensitivity detection.
MASKING AREA means the area coordinate of detecting time.

Event Set Up
ALARM, LOSS, MOTION extended warning, video loss and moving detection open/close setting.
BUZZER HOLD TIME means the extended time of the recorded events.
REPORT HOLD TIME means the extended time of the events.
ALARM POLARITY is the high and low voltage setting of the buzzer.

Package includes:

Remote Control Included
Power Consumption DC12V / 1A.

1Pc CR2025 Button battery included, 3V, 150mah.