Fankerba -3/4" AC 220V Four Way Inlet Water Solenoid Valve for Washing Machine,Drinking Fountain,etc,Nomally Closed,Plastic (AC 220V)

Fankerba -3/4" AC 220V Four Way Inlet Water Solenoid Valve for Washing Machine,Drinking Fountain,etc,Nomally Closed,Plastic (AC 220V)

Suitable for household appliances, industrial equipment, agriculture and forestry water, medical equipment, etc. Water inlet diameter:(3/4" Outside thread,Ø26mm). Water outlet diameter:4 ports ,each port is Ø12mm / Ø0.47 inch. Regular flow is 5L/min for this inlet water solenid valve. Normally Closed solenid valve:it will be open the valve when energized Main technical indicators and matters needing attention:

1. Environmental conditions for use of water inlet valve of low pressure solenoid valve

1.1 the altitude shall not exceed 2500 meters

1.2 ambient temperature is 0 to 40 ℃ / 32-104℉

1.3 the air relative humidity below 95% (25 ℃/77℉ temperature)

2. Type and rated technical parameters

2.1 Type: guided (one-way) solenoid valve (also known as no-packing type guide valve action or solenoid valve)

2.2 rated voltage: AC 220V

2.3 working mode: short-time quota system (i.e. intermittent duty cycle system)

2.4 insulation grade: class E insulation

2.5 the use of fluid (0-85 ℃) water

2.6 water pressure: 0.02-0.8mpa

2.8 water flow characteristics:

The water pressure (Mpa) 0.02/0.1/0.3/0.8

Flow rate (L/min) : >5> 11>18>32

3. Product transportation and storage

3.1 in the process of storage, it shall not fall down, rain or snow will fall on it, and the outer carton will be damaged

3.2 without opening the outer packing cartons, the products shall be kept in well-ventilated indoor warehouses, and there shall be no corrosive gas in the surrounding air

3.3 water flow can be controlled at 4 liters 2.5 liters 1 liter and 0.5 liter per minute

4.Flow characteristics:( L/min )

4.1When the water inlet pressure is 0.02Mpa, flow is ≧5L/min

4.2When the water inlet pressure is 0.25Mpa,flow is ≧15L/min

4.2When the water inlet pressure is 0.8Mpa, flow is ≧25L/min

Product size:

117mm x 111mm x 57mm /4.6inch x 4.4inch x 2.2inch

Installation size:

Mounting hole distance: 45 mm /1.77inch