ACK-E15 DC Input 12V-24V Step-down DC Cable + DR-E15 DC Coupler LP-E12 Dummy Battery for Canon EOS-100D kiss x7 EOS 100D Rebel SL1

ACK-E15 DC Input 12V-24V Step-down DC Cable + DR-E15 DC Coupler LP-E12 Dummy Battery for Canon EOS-100D kiss x7 EOS 100D Rebel SL1

★ Step-down cable:Input DC Female plug size is: 5.5mm×2.1mm/2.5mm,Please note the size of the output plug of the external power adapter: 5.5mm×2.1mm/2.5mm Male, Support most of the power adapter that output voltage is 12V to 24V, current 1.5A or above. ★ In order to avoid the interface between the dummy battery and the USB cable, long-term multiple insertions and removals result in wear and poor contact. After removing the dummy battery from the camera, it is recommended that you do not separate the connection between the dummy battery and the USB cable. ★ Some cameras require that the lid of the camera's battery compartment must be closed, After closing the lid, the camera can be turned on, For details, see the Manual illustration. ★ Easily use your own 12V-24V power adapter. dc step-down cable is suitable for 12V-24V power adapters for some printers, surveillance cameras, car chargers, routers, monitors, etc. ★ If you have any problem during using our product,you are welcome to contact us for further assistance. We will do our best to assist you and making you 100% satisfaction. Step-down Voltage DC Cable

DC Input : 12V-24V, current 2A or more.
DC output: 8.15V / 8.4V
DC step-down cable length: 110cm

Compatible with:
For Canon EOS 100D(kiss x7) EOS Rebel SL1

Package include:
1 x Step-down Adapter Cable
1 x DR-E15 DC Coupler / LP-E12 Dummy Battery
1 x Free cable (male to male)

(DC drive cable, Customized production, Strict inspection,High quality chip,Efficient conversion rate.)
Tips:
General digital battery printed above parameters 7.2V / 7.4V labeled battery, it is the camera's minimum operating voltage, these batteries need to use 8.4V charger, full of power, charger 8.4V said no-load voltage, operating voltage and no-load voltage are two different concepts. External power used in the camera, You need to have enough power to supply, the camera is a load,the operating voltage is far lower than the no-load voltage.Therefore, the Camera adapter's no-load voltage is usually between 8V-9V (Note: the multimeter test is no-load voltage).