#10 x 1-1/4" Flat Head Wood Screws, Phillips Drive, Type 316 Marine Grade Stainless Steel, Partial Thread, Bright Finish, Quantity 100 by Fastenere

#10 x 1-1/4" Flat Head Wood Screws, Phillips Drive, Type 316 Marine Grade Stainless Steel, Partial Thread, Bright Finish, Quantity 100 by Fastenere

Wood screws have deep coarse threads and are specifically designed for use in wood projects. The shank of the wood screw allows the screw to spin freely inside of the outermost piece of wood and draw the inner piece tight against it by having the threaded end grip the wood and pull. Flat heads are countersunk with a cone shaped bearing surface and a flat top that is used in applications where the head of the fastener must sit flush with the mating surface. Phillips drive is a cross head design and is the most commonly used type in America. Phillips is often criticized for its tendency to cam out at lower torque levels but this was actually a deliberate feature of the design, for the purpose of assembling aluminum aircraft without overtightening the fasteners. The vast majority of stainless steel fasteners are produced with metals from the austenitic family. Their high levels of chromium and nickel provide tough corrosion resistance and the ability to withstand considerable physical strain without fracturing, albeit at a higher cost than the martensitic varieties. Made of 316 grade stainless steel offers the highest quality with the greatest corrosion resistance and are ideal in the marine enviroment offering superior performance when exposed to direct salt spray sea water.

These Phillips flat wood screws are a 316 marine grade stainless steel with rolled threads. Rolled threads have a constant shank diameter that tapers at the point. Wood Screws are a thread forming screw with a coarse pitch thread. 316 marine grade stainless steel is the choice for severe enviroments that require a high level of corrosion resistance. Type 316 stainless steel is the preferred material used in the marine enviroment and boating industry due to its resistance to pitting corrosion. 316 stainless steel has high resistance to corrosion from sea sealt water and industrial chemicals.

Detailed Techincal Information

• Screw Size: #10 (0.190")
• Length: 1-1/4"
• Head Style: Flat
• Head Diameter: 0.362"
• Head Height: 0.116"
• Drive Style: Phillips
• Drive Size: #2

Closest Fractional Equivalents

• Head Diameter: 23/64"
• Head Height: 7/64"