AKOAK Simple DIY Lipstick Mould Set,Creative and Lovely Various Shapes of Lipstick Making Mould for 12.1mm Lipstick Tube (Nail)

AKOAK Simple DIY Lipstick Mould Set,Creative and Lovely Various Shapes of Lipstick Making Mould for 12.1mm Lipstick Tube (Nail)

Component part: 1 aluminum ring, 1 acrylic bracket, 1 silicone lipstick mold Soft and easy to demoulding. This set of simple lipstick making mold is very simple to use (see the picture for the specific application method) Suitable for common diameter 12.1mm lipstick tube Use to make your own lipstick, easy to use, assured, and personalized. Make your own lipstick,can recycle your used lipstick tube, both personality and environmental protection

Feature:
--soft and easy to demoulding.
--This set of simple lipstick making mold is very simple to use (see the picture for the specific application method).
--Suitable for common diameter 12.1mm lipstick tube.

TIPS:
1.Rub a small amount of oil inside the mold and on metal ring with a Q-Tip(just enough to coat)
2.Please keep the mold clean and dry after use.
3.If demoulding is difficult, you are advised to purchase a special demoulder.
4.Novice suggested to try more, failure is ok, raw materials can be reused.
5.When filling, please pay attention to the temperature is not too high, between 60 and 70 degrees Celsius is ok, to avoid the mold deformation due to high temperature.

Package included:
1 x aluminum ring
1 x Single hole acrylic bracket
1 x silicone lipstick mold
not included lipstick tube