FYSETC 3D Printing Platform 300x300 Build Plate - Double Sided Textured PEI Spring Steel Sheet: Powder Coated Flexiable Texture Build Surface

FYSETC 3D Printing Platform 300x300 Build Plate - Double Sided Textured PEI Spring Steel Sheet: Powder Coated Flexiable Texture Build Surface

1. 300mm Print Bed Upgrades: Compatible with 300mm x 300mm hot bed/build plate, TAZ Workhorse, TAZ Pro, TAZ 6, TAZ 5, TAZ 4, TAZ 3, may fit A8 plus, et5 and et5 pro. !!!Please measure your bed, not rely on build volume/printing size which is about 5-10mm smaller than the heatbed 2. Size: 300mm x 300mm/11.8*11.8 inch. It's a stainless steel plate with double-sides special coating(PEI), which makes the bottom of the model show a textured matte finish 3. Two-in-one type of PEI powder coated hardended steel spring sheet, not easy to get desformed. It behaves as most PEI sheets would and works great with PLA, TPU, PETG, ABS, as well as many other filaments. If you need more adhesion for tough-to-stick filaments like Nylon, feel free to use glue sticks, they will wash off with water after use 4. Easy to install, take off the back paper on the magletic base, stick it to the heated bed, then align the steel plate on it. The model can be easily removed by bending the plate when the bed temp cools down. It is possible to add inductive Z probes and add ABL printers for certain objects that need to be upgraded 5. To clean, use some isopropyll alcohl after each use to keep contaminants away. If you ever need to restore adhesion, use very fine sandpaper 600 or higher and pass lightly, then clean with alcoholl. For PLA and PETG we recommend 70° C bed temperature Features:

Model: Double Sided Textured PEI Powder Coated Spring Steel Sheet

Size:
300*300mm(With magnets)

Material: PEI powder coated hardened steel spring sheet

Filament Material Compatibility: PLA ABS PETG TPU PVA, etc.

Advantage:
(1) Two-in-one type of PEI powder coated type make it more easy to use
(2) Easy to take off the models by bending or popping it off
(3) Material Compatibility range is wide, almost all the filament is Compatible
(4) Durable hardened steel helps lower running cost especially for long time printing
(5) Make it possible to add inductive Z-probe and add ABL for some printers need to be upgraded

Maintenance:
(1) Wipe the print surface before and after a print with isopropyll alcoholl to keep the surface clean
(2) Make sure that the distance between nozzel and surface is far enough to protect the surface being scratched
(3) If printing PETG, TPU, TPE, and RYNO, make sure the bed is heated BEFORE attempting to remove the prototypes from the bed

Package includes:
1PC*steel sheet