PCS WS-120V-W 0-10V Relay Dimmer Wall Switch, 120V, White

PCS WS-120V-W 0-10V Relay Dimmer Wall Switch, 120V, White

Replaces an existing wall switch to control dimmable LED fixtures (up to 15 Amps) Provides 0-10V LED dimming when used with receiving module (sold separately) 4 Dimmer Presets through single or double tap functions No software configuration necessary Integrated occupancy sensor input Replace a standard LED light switch and add On/Off/Dim controls with the PCS 0-10V Relay Dimmer Wall Switch, 120V. This unique dimmer wall switch, when used with the RM-0-10V Receiving Module (sold separately), implements Relay Dimming technology to eliminate flickering and inaccurate dimming in connected LED loads. The switch can be configured to work with an occupancy sensor to automatically adjust light levels when people enter or exit a room. The Relay Dimmer Wall Switch mounts into an existing single- or multi-gang box and can be connected to up to 3 remote wall switches (RWS). NOTE: Neutral wire required. Requires the RM-0-10V, sold separately, to operate LED fixtures. Rated for indoor use only. PCS has developed the fastest, most reliable hardwired LED dimming transmission method that effectively eliminates signal interference caused by electrical noise and power interruptions. Relay Dimming is very simple and accomplishes one simple function - dimming LED fixtures without having to run two 0-10V wires from the wall switch or occupancy sensor. Relay Dimming does this by removing the need for a transmitter circuit. It only uses the relay that controls the power to the LED fixture's circuit. What Relay Dimming does is, in effect, for a very brief period, turns the power off and then back on to eliminate noise and signal interference. Noise and signal attenuation are no longer factors in Relay Dimming. Contents: Relay Dimmer Wall Switch. SPECS: Maximum Load: 15A. Connections: 14 GA, 105 C insulation. LED Indicator: Yes. Dimensions: 4.3 (H) X 1.7 (W) X 1.9 (D) inches. Weight: 0.3 lbs. Mounting: Standard J box. Input Power: 120 VAC, +/- 10 percent. Input Frequency: 60 +/- 0.3 Hz. Operating Temp: -40 to 140 degrees F (-40 to 60 degrees C). Warranty: 5 Years. Manufacturer Part #: WS-120V-W. Color: White.