SNIDII Screen Replacement for iPhone 5C Black 4.0 inch with Earpiece and Camera Full Assembly 3D Touch LCD Display Digitizer Frame Replacement with

SNIDII Screen Replacement for iPhone 5C Black 4.0 inch with Earpiece and Camera Full Assembly 3D Touch LCD Display Digitizer Frame Replacement with

✅ Newly upgraded 720P HD LCD screen fit for iphone 5C 4.0 inch screen replacement. None dead pixels, normal light up, without lines on the screen. Perfect to touch work. Bright colors not hurt the eyes. The auto dimming function can still be used normally after the screen is replaced. ✅ 【about 3Dtouch Function】. For security it has design Touch ID to only work with your original home button, Please transfer the original home button from your original screen to this new screen to Touch ID. ✅ Easy to install: Recommend watch more videos about screen replacement on YouTube before you replaced. 【Coming with a full set of disassembly tools. Since installation requires a certain amount of knowledge and skills, it is recommended that you consult an expert when you are unable to install it yourself.】 ✅ Upgrade the pressure screen technology, perfectly supports the 3Dtouch function. Used for replace broken,dead pixel,damaged, touch is not working, touch response issues,non-functioned screen. Upgrade cold-plated electroplating process vacuum coating touch, using anti-fingerprint oil layer, spraying strong effective anti-fingerprint, no fingerprint and oil stain, high-density nanotechnology, triple strengthening screen, come with Free screen protectors, so your iphone will no longer be broken. ✅ Quality Control: Each LCD is Double Tested Strictly by QC Team to ensure 100% in Good Condition before Shipping. Using 2.5D arc edge technology, precise original machine hole position, one screen assembly has gone through multiple procedures, repeated test and polishing, and the flat line of the cable line has no burrs to perfectly fit your iphone, and the feel is as good as the original screen.

The Screen Replacement Black Repair Kit Only for iPhone 5C 4.0" [There is Proximity Sensor + front camera bracket + earpiece + heat dissipation graphite iron sheet. No home button]

Model fit for  A1532 / A1456 / A1507 / A1529 / A1526. Please confirm your phone model before purchasing.

Installation Tips:

(1)Power Off the device before starting.

(2)Use the correct screwdriver to open the screws.

(3)Need to remark the screws and keep in mind its' original position.

(Note: Incorrect screws will damage your phone.)

(4)Remember to disassembly the battery connector when doing further steps.

(5)Do not forget to test the LCD.

(6)Be careful to disassembly the home button, it is easy broken.

(7)Avoid to pull the flex cable too hard.

(8)Do not press the upper corners of the LCD, it is easy damage.

Q&A

Q: If I installed the screen replacement as you said, but black screen/ can't touch / have stripes.

what should I do?

A: Could you check and operate as following steps?

a.Please power off your phone, then separate the screen and the other part.

b.Please check the flex cables are in good condition and there are no debris on the connector. Then press tight on the ribbon cables to make sure they connected well.

c.Restart your phone.

NOTE: the screen belongs to fragile items, so please be careful when you install it in case it break.

If still not work, please CONTACT US.

Friendly Suggestions:

There are kinds of Youtube Videos, telling how to replace screens.

Videos are much better than Instructions.

Package List:

-1* iPhone 5C 4.0 inches Screen Replacement Assembly

-2* screwdriver

-1* Suction Cup

-1* Mobile phone film sticking tool

-1* SIM eject tool

-2* Plastic Disassembly Pry Tools