SSC Controls Touch 4 TIG Welding Remote Fingertip Torch Hand Control, 14 Pin Plug, Miller Welders, T810-1425

SSC Controls Touch 4 TIG Welding Remote Fingertip Torch Hand Control, 14 Pin Plug, Miller Welders, T810-1425

TIG welding hand control for Miller welders (14 pin plug). Press to activate gas contactor and increase amperage through four levels. Preset the weld current on your machine to where you want the current to be for the job. 25-ft cable with 14-pin plug for Miller TIG welders. Note: Does not work on the EconoTIG. Made in USA by SSC Controls Company. The Touch 4 fingertip control is an all-new approach to TIG welding amperage hand controls. The idea is simple and innovative, and the result is a steady hand and excellent control. Instead of a knob that you have to turn or a slider that you have to move while trying to hold your TIG torch steady, the Touch 4 relies on pressure applied by your finger. The Touch 4 works in steps: you apply pressure to turn on the contactor, giving you your low-amps setting, and then you increase pressure through 4 steps: 25%, 50%, 75%, and 100% of the setting on your panel. Set the amps on your panel equal to (or slightly higher than, depending on your preference) the suggested current for the thickness and metal type, and then you simply dither to create the puddle and weld that you want. This model is for Miller welders that use the 14-pin plug (that plugs into the 14-socket remote output receptacle on the welder). Can be used to replace Miller hand controls such as the RCCS-14 (043668) or RCC-14 (151086) or the RFCS-14 foot pedal (043554). Note: Will not work on Miller EconoTIG (it allows on/off but no control when used on the EconoTIG). Includes 30-day money-back guarantee. US Patent 9,550,250 B2. Designed and made in the USA.