uxcell F696ZZ Flanged Ball Bearing 6mmx15mmx5mm Double Shielded Chrome Steel Deep Groove Bearings 10pcs

uxcell F696ZZ Flanged Ball Bearing 6mmx15mmx5mm Double Shielded Chrome Steel Deep Groove Bearings 10pcs

[Size] - F696ZZ ABEC1 bearing (I.D.=6mm, O.D.=15mm, Thickness=5mm, Flange Dia: 17mm). [Durable] - Chrome Steel (GCr15) races offer high hardness and great wear resistance, thus extend bearings' service life. [Load & Speed] - Dynamic load rating of 1139N and static load rating of 418N. The limiting speed is 40000 RPM under grease lubricating. [Easy to Maintain] - Shields on Both sides to keep lubricant in. Z1 noise level for most general use. [Application] - Commonly used for glider/rocker arms, wheels of the cart, lawnmowers, printers, pumps, motors, gearboxes, reducer, textile machinery, electronic equipment, and more. Note：
Please refer to the picture and select right type of bearings before your order (Sealed or Shield on Both or Single side of the bearing). Suffix on the bearing just for differentiating between Sealed and Shield type of bearing. It would not affect the use of our product.


Description:

Single-row, pre-lubricated, normal accuracy.
Deep Groove Ball Bearings are one of the most widely used rolling bearings.
With small friction and high-limit speed, Ball Bearings are cost-effective and require little maintenance.
Chromium Steel (GCr15) made with heat treating, provides high and uniform hardness, good wear resistance
Suitable for all kinds of industrial equipment, micro motor, small rotary motor, office equipment and so on.



Selection Guide:
Shields (Designation Suffix Z/ZZ) - High speed. Protect from dirt and debris.
Sealed (Designation Suffix RS/2RS) - Made of sheet steel reinforced nitrile butadiene rubber (oil- and liquid-resistant). Lower limit speed than Shield Bearings.


Specification:
Model: F696ZZ
Shielded Type: Double Shielded
Inner Race/Outer Race Material: Chrome Steel (GCr15)
Cage Material: Stamping Steel
Inner Diameter (d): 6mm
Outer Diameter (D): 15mm
Thickness (B): 5mm
Flange Dia.: 17mm
Flange Thickness: 1.2mm
Dynamic Load Rating (Cr): 1.34kN
Static Load Rating (Cor): 0.523kN
Accuracy Class: P0 (ABEC1)
Noise Level: Z1
Number of Pack: 10 Pcs