MATEK Mateksys F405 Wing V2 Flight Controller F4 FC New Layout ICM42688P DPS310 ArduPilot INAV for RC FPV Racing Drone Fixed-Wing……

MATEK Mateksys F405 Wing V2 Flight Controller F4 FC New Layout ICM42688P DPS310 ArduPilot INAV for RC FPV Racing Drone Fixed-Wing……

Updated version: Matek F405-WING V2 Flight Controller ,it is designed specially for fixed wing. USB:Type-C; Baro:DPS310; Current sensor:100A continuous, 220A Peak; Current scale: INAV 150 ArduPilot BATT_AMP_PERVLT= 66.7. INAV:MatekF405SE, 6.0 or newer;ArduPilot:MatekF405-Wing, 4.4 or newer. MCU: STM32F405RGT6, 168MHz , 1MB Flash; IMU: ICM42688-P; Blackbox: MicroSD card slot. 6x UARTs; 2x I2C; 3x ADC; 1x Softserial_Tx option(INAV); 10x PWM outputs. FC Specifications


MCU: 168MHz STM32F405
IMU: MPU6000 accelerometer/gyro (SPI)
Baro: BMP280 (I2C)
OSD: INAV OSD w/ AT7456E chip
Blackbox: MicroSD card slot (SD/SDHC)
VCP & 6x UARTs
2x Motors, 7x Servos outputsv 2x I2C
3x LEDs for FC STATUS (Blue, Red) and 3.3V indicator(Red)
Built in inverter for SBUS input (UART2-RX)
PPM/UART Shared: UART2-RX
SoftSerial on TX2 pad
Battery Voltage Sensor: 1:10 (Scale 1100)
WS2812 Led Strip : Yes
Beeper : Yes
RSSI: Yesv FC Firmware

INAV Flight
Target: MATEKF405SE
PDB

Input voltage range: 9~30V (3~6S LiPo) w/TVS protectionv 2x ESC power pads
Current Senor: 104A, 3.3V ADC, Scale 317
BEC 5V output

Designed for Flight controller, Receiver, OSD, Camera, Buzzer, 2812 LED_Strip, Buzzer,
GPS module, AirSpeed
Continuous current: 2 Amps, Max.3A
BEC 9V /12V output

Designed for Video Transmitter, Camera, Gimbal ect.
Continuous current: 2 Amps, Max.3A
12V option with Jumper pad
BEC Vx output

Designed for Servos
Voltage adjustable, 5V Default, 6V or 7.2V via jumper
Continuous current: 5 Amps, Max.6A
Output Ripple: 50mV (VIn=24V, VOut=5V@5A load)
BEC 3.3V output
Designed for Baro / Compass module and Spektrum RX
Linear Regulator
Continuous current: 500mA
Physical Mounting: 30.5 x 30.5mm, Φ4mm with Grommets Φ3mm
Dimensions: 56 x 36 x 13 mm
Weight: 25g