Cast Saw, Orthopedic Cast Cutter, Medical Electric Plaster Cutting Saw Oscillating Speed Adjustable for Tearing Polymeric Materials 110V 12500rpm/min

Cast Saw, Orthopedic Cast Cutter, Medical Electric Plaster Cutting Saw Oscillating Speed Adjustable for Tearing Polymeric Materials 110V 12500rpm/min

✄ SCOPRE OF APPLICATION -- This cast saw is used for the removal of plaster bandage after fixed reduction, suitable for all types of plaster bandage. cast cutter Also Turn to 6 gear can be used to cut fiberglass( but not recommended to cut glass fiber, the motor may have issues in the long run due to dust) ✄ PRODUCTS CLASSIFICATION -- 1.Anti-shock type,degree and protection against harmful into the liquid level points:medical saw is II type.B is common tyoe. 2.Divided by the work of system: medical electric plaster Cutting saw is running short. ✄ SAFE & RELIANLE -- The electrically operated gypsum saws through the saw blade swinging sawing gypsum,in use,even if the saw blade will contact the patient skin not to create cuts.the electrical machinery uses the double insulation protective device,has guaranteed the safety of operators and patient. ✄ HIGH QUALITY -- This plaster saw has FDA approval, uses micro imported motor with low noise, small vibration, more powerful and reliable with faster speed, did not overheat. Alloy blade is suitable for long time use. It comes with a foam padded travel case, and it is sturdy and well made. ✄ SPEED ADJUSTABLE -- Cast Removal Saw Speed adjust from large to small, in the actual test 1-5 gear, The closer it is to the skin, the slower it should be, turn to low gear.

Medical Electric Plaster Cutting Saw With Three Blades

Main Technical Data:

- Voltage: AC 110V/60Hz

- Input Power: 125W

- Non-load Frequency:  more than 12500r/min

- Non-load Speed: ≤75dB

- Motor Winding Insulation Class: E Class

Application and Attention:

1. Before use, check whether the formation of saw blade, missing teeth, mounting, installing the saw blade when the blade shaft to be fixed, embedded with the pull head axis position of the flat side, with the other nuts in front of the saw blade wrench removed, exit concave sleeve and saw blade, saw blade and then put the other tightly, check the motor ventilation road, should be kept clear to prevent foreign objects clogging, resulting in poor ventilation, resulting in excessive temperature rise of the motor work, or even burn the motor

2. When used, not used much pressure, when the blade got stuck in the plaster bandage, it should cut off the power slowly withdraw, not to open when the power switch off, easy to damage the motor

3. The temperature of the motor housing using the increase over time, such as hot case temperature should be found to be suspended, wait to cool before using, or likely to cause motor overheating and burning

4. When have abnormal sound, vibration is too large, please maintenance in time

5. Should be wipe clean the plaster saw after operation, kept in dry places(relative humidity less than 80%, non corrosive gas environment)to prevent water and damage and stumble

Package includes:

1 x Medical Electric Plaster Saw

2 x Circular Saw Blade

1 x Fan-shaped Saw Blade

1 x Wrench

1 x Carry Box

1 x Manual