Terske Ultra-Low Profile Superlight Titanium Bottle Cage Bolts

Terske Ultra-Low Profile Superlight Titanium Bottle Cage Bolts

𝐔𝐋𝐓𝐑𝐀-𝐋𝐎𝐖 𝐏𝐑𝐎𝐅𝐈𝐋𝐄 — Our ultra-low profile titanium bottle cage bolts are lightweight, good looking, and stay out of the way. 𝐌𝐀𝐓𝐄𝐑𝐈𝐀𝐋 — Precision-machined Grade 5 titanium (Ti6Al4V) 𝐃𝐈𝐌𝐄𝐍𝐒𝐈𝐎𝐍𝐒 — 1.75mm head height - 8.75mm head diameter - 2.5mm hex - M5x0.8 thread - 12mm thread length 𝐖𝐄𝐈𝐆𝐇𝐓 — Our ultra-low profile bolts weigh 1.2g apiece

Have you ever had too much bolt? It seems that some designers don't take hardware height into account when designing their water bottle cages.

Having bolt heads protrude into cage makes for more difficult bottle insertion and removal, mars bottles, and can remove the finish from the bolts themselves. All of this is why we designed and machined our own Ultra-Low Profile Bottle Cage Bolts from strong, corrosion-resistant 6/4 titanium But it turns out that they look pretty great filling unused bosses too!

With heads that sit only 1.75mm above the boss, our Ultra-Low Profile bolts look clean and minimize interference with bags or cables. Not only are they attractive and functional, our Ultra-Low Profile Bottle Cage Bolts weigh 1.2g each or 5g for a set of four. That's pretty darn light.

Important Note: These bolts won't be for everyone. In order to achieve such a low head while maintaining bolt strength, these bolts use a 2.5mm hex. That means that care must be taken and the following are required for installation:

* High-quality 2.5mm hex bit in good condition

* Copper anti-seize compound or dielectric grease

* Torque wrench set no higher than 2-3Nm

In addition, it is wise to remove and re-grease the bolts annually to prevent seizing. Re-grease more often if you sweat heavily, have leaky bottles of electrolyte drink, or ride on salted roads or near the sea.