Beduan Push to Connect Fitting, 1/2" Tube OD x 1/2" NPT Thread Male Straight Pneumatic Air Fitting (Pack of 5)

Beduan Push to Connect Fitting, 1/2" Tube OD x 1/2" NPT Thread Male Straight Pneumatic Air Fitting (Pack of 5)

Body Style: Male Straight / Size:1/2” Tube OD x 1/2“ NPT thread Straight push in connect fitting Fluid Type:Air Vacuum (no freezing) Working Pressure:0-1.0MPa | 0-150psi/Applicable Tube:PU / PA / PE / PVC Working Pressure:1.0Mpa | 145psi.Seal O-ring:NBR ; Lock Claw:Stainless Steel(SUS) ; Body:Plastic(PET) Working Temperature:0-60°C | 32～140°F ；Negative Pressure:-100Kpa | -29.5 In Hg

1/2" Tube OD x 1/2" NPT Thread

Material: Copper and Plastic

Shape: Straight

Working Pressure:0-1.0 Mpa | 0-145 Psi

Fluid Type: Air

Working Temperature: 0-60°C | 32～140°F

Applicable Tube:PU / PA / PE / PVC

installation method:

1 . After the pipe is cut off, remove the burr and insert one end of the pipe into the socket of the joint (must be inserted into the bottom) to achieve a firm connection and sealing effect.

2 . After repeatedly pulling out the pipe. The worn part of the end should be cut off. Continue to use after leveling.

3. When disassembling the pipe, use your thumb to press the connector ferrule in and gently pull out the pipe.

4. After installation, you just need to rotate the joint body to adjust the direction of the pipe.