Beduan Pneumatic Push to Connect Fittings 5/32" OD Elbow Nickel-Plated Brass Connector Push Lock Union Fitting (Pack of 2)

Beduan Pneumatic Push to Connect Fittings 5/32" OD Elbow Nickel-Plated Brass Connector Push Lock Union Fitting (Pack of 2)

Type:5/32" Elbow Push to connect fitting Fluid Admitted:Air Vacuum Water (no freezing) Working Pressure:0-1.0MPa | 0-150psi/Applicable Tube:PU / PA / PE / PVC Seal O-ring:NBR/ Lock Claw:304 Stainless steel/Body:Nickel-Plated Brass. Working Temperature:0-60°C | 32～140°F/Negative Pressure:-100Kpa | -29.5 In Hg

Size: 5/32" Tube OD

Material:Nickel Plated Brass

Working Temperature: 32～140°F

Fluid Admitted: Air

Max Working Pressure: 0~145Psi

Applicable: Pipe PU/PA/FEP/PFA

installation method:

1 .After the pipe is cut off, remove the burr and insert one end of the pipe into the socket of the joint (must be inserted into the bottom) to achieve a firm connection and sealing effect.

2 .After repeatedly pulling out the pipe. The worn part of the end should be cut off. Continue to use after leveling.

3.When disassembling the pipe, use your thumb to press the connector ferrule in and gently pull out the pipe.

4.After installation, you just need to rotate the joint body to adjust the direction of the pipe.