DAE WP-400m 4" Woltmann Helix Water Meter, Pulse Output, Cubic Meter

DAE WP-400m 4" Woltmann Helix Water Meter, Pulse Output, Cubic Meter

Factory Calibration Certificates available. DAE Controls LLC is a Minority Business. Please feel free to get the NMSDC Minority Supplier Certificate from DAE Controls Website. Horizontal position with dial facing upwards or sideways. It is not recommended to have dial facing downwards. It can also be installed vertically with water flowing upwards. Cloud Metering available (2nd picture) with DAE CC2030 Gateway. CC2030 will collect water usage from DAE AMR (for 16 meters) or AMR130AN (for 1 meter) and send them to cloud server through Ethernet. With PC, cell phone, the landlords can see real time data, monthly water usage & billing reports to their tenants. If there is abnormal usage (ex. Broken piping), an email alert will be sent to your cell phone. No IT guy required. Just connect wires as per a simple picture (see video) & ready to go. Ready for use with DAE CO-10 (Electronic Pulse Counter) or DAE CO-10 KIT - An inexpensive remote reading solution (6th picture). Can also use with DAE AMR130 (Auto Meter Reading Module for single water meter) and DAE AMR (for 16 water meters) for remote reading (5th picture). CO-10 or AMR130 will be purchased separately. Conforms to both AWWA C701 and ISO 4064. for clean City water only. Accuracy: ±2% as per AWWA C701 test procedure. Maximum Flow Rate: 630 GPM (143.01 m³/h), Nominal Flow Rate: 420 GPM (95.34 m³/h), Minimum Flow Rate: 15 GPM (3.405 m³/h). 4 inch Woltmann Helix Water Meter with Pulse Output, Measured in Cubic meter.
Connection: ASME Class 125 Flanges per B16.1
Sealed Dry Dial for Clear Readings
Meter must be installed with direction of flow as indicated by arrow cast into the meter body.
Install valve before inlet of meter. A valve at outlet is also recommended.
Install meter in a location with at least 10 diameters of straight pipe at the inlet and 5 diameters at the outlet to assure proper flow profile to meter.
Unit: Cubic meter
Accuracy: ±2% as per AWWA C701 test procedure.
Pulse Output: 0.1 cu m per pulse, a dry contact (i.e. no voltage) reed switch with 2 wires, 1.5m. The third party system should not generate electricity more than 0.01A (typically 0.005A like DAE AMR), 24VAC/DC.
Meter Body: Cast iron, epoxy coated
Item dimension: 9.84 inch length, 9 inch Width, 11.3 inch height. Weight: 42 lbs.
Max. Reading: 999,999.999 Cu meter, Min. Reading 0.001 Cu meter. The 1st digit from the right is in Cu meter. For example, if you see 001234 on the register, it is 1234 Cu meter. Reading on 4th picture of the listing is 4.211 Cu meter.
The max. working pressure is 232 psi, exceeding AWWA standard 150 psi.
Max temperature: 104F (40C)
Pressure Drop: 0.98 psi at 420 GPM (95.34 m³/h)
Conforms to AWWA C701 and ISO 4064, for clean water only.
The meter register assembly can be removed for repair or replacement without disrupting the process flow.
Maximum Flow Rate: 630 GPM (143.01 m³/h), Nominal Flow Rate: 420 GPM (95.34 m³/h), Minimum Flow Rate: 15 GPM (3.405 m³/h)
For the buyers outside of USA, in addition to the tax, the carriers may charge brokerage fee.