KETOTEK KT99 Temperature Controller 120V 10A Digital Thermostat Regulator Switch Dual 1.5m Waterproof Probe for Heater Cooler Fahrenheit Display

KETOTEK KT99 Temperature Controller 120V 10A Digital Thermostat Regulator Switch Dual 1.5m Waterproof Probe for Heater Cooler Fahrenheit Display

【Two direct output】KT99 digital thermostat support two independent direct output, with 2pcs 1.5m NTC waterproof sensor can work with two independent equipment, with °F display. 【Easy operation】KT99 Temperature controller control the load by setting the start and stop temperature. -58~248°F wide control range is good for both heater and cooler. 【Compressor delay time, alarm setting】 KT99 thermostat regulator can set the compressor delay time(0~5min) to make the cooler delay start. By setting high/low temperature alarm value to keep the home appliance, incubator, seeding pads, refrigerator ,reptiles, Aquarium, and other appliances safe. 【Data storage and reset function.】 All parameters setting can be saved after short circuit and power off, and it also can be reset as requirement. 【Temperature calibration】±1°F Control Accuracy with (-30~30°F) Temperature Calibration, can make the all process more accurate, keep the temperature in desired range. 1. Overview

Independent Dual-way temperature controller.
All parameters setting can be saved after short circuit.
Two ways directly power output.
Reset function
Temperature calibration function
Compressor delay start function
High temperature alarm function (display -H-)
Low temperature alarm function(display -L-)

2. Specifications

Power Supply:120Vac 50/60HZ
Temperature control range:-58~248°F
Resolution Ratio:0.1°F (-9.9-99.9);1°F (other range)
Control accuracy: ±1°F
Sensor 1 2: NTC10K Waterproof sensor each, 1.5m
Output 1 2: Max10A directly output each
Size:100mm(L)*55mm(W)*32mm (Depth)
Cutting size:75(L)mm*55(W)mm
M3 screw hole

Heating Mode
Start Temperature ≤ Stop Temperature

Cooling Mode
Start Temperature ≥ Stop Temperature