BETAFPV Cetus FPV RTF Drone Kit for Brushed Racing Drone, with LiteRadio 2 SE Transmitter VR02 FPV Goggles, Fly FPV Drone Kit for Beginners to Fly

BETAFPV Cetus FPV RTF Drone Kit for Brushed Racing Drone, with LiteRadio 2 SE Transmitter VR02 FPV Goggles, Fly FPV Drone Kit for Beginners to Fly

Cetus FPV Kit: BETAFPV Cetus FPV kit is prepared for the FPV starter. It comes with a special design of Cetus Brushed Whoop Quadcopter, LiteRadio 2 SE and VR02 FPV Goggles. The Cetus quadcopter has an excellent self-protection function, which can make an emergency landing whenever loses control or is in low battery FPV Simulator Supported: Cetus FPV Kit comes with a LiteRadio 2 SE. Radio Transmitter which can learn and practice flying a quadcopter through an FPV simulator before real flying. It can acts as a USB Joystick when connected to a personal computer. So you could use it to play FPV simulators like EREADRON. And this transmitter also support Jostick calibration since the joystick data may be offset after it has been used for some time VR02 FPV Goggles: Cetus FPV Kit includes a VR02 FPV goggles and the quadcopter has a built-in VTX and camera, allowing users to fly quadcopter with a First-person view and have an immersive flying experience. Users also can check the quadcopter flying status from the OSD information shown on the goggles Height hold function: height hold function allows Cetus quadcopter hover. The quadcopter can stay at a current height when the pilot's hands are away from the transmitter. The barometer/laser achieves accurate and stable positioning, which makes the quad float very stable indoors. Flight has never been so easy for a beginner. (The height hold function is only available in N mode) Manual and Package: We pack a User Manual and a Quick star Guide in the package, pilot can learn to use this kit easier. All parts are stored in a special custom carry bag that provides better protection and is easy to carry BETAFPV Cetus FPV RTF Drone Kit for Brushed Racing Drone, with LiteRadio 2 SE Transmitter VR02 FPV Goggles, Fly FPV Drone Kit for Beginners to Fly Faster Further

Preflight Checks
Please check all steps below is ready before flying the drone:
1. Verify that all components are included, without damage and the airframe is with no deformation.
2. Verify that propellers and motors are installed correctly and stably.
3. Ensure that propellers do not scratch against frame ducts and motors spin smoothly.
4. Verify batteries (of quadcopter, remote control radio transmitter, and FPV goggles) are fully charged.
5. Be sure pilot is familiar with all flight controls. (Refer "Remote Control Radio Transmit- ter").
6. Always keep a safe distance in all directions around the quadcopter (1 meter or more) when having a test-flight. Operate the quadcopter carefully in open space.

Specification
Positioning system: Optical flow / Barometer / Laser
Height Positioning: Laser / Barometer
Angle Locating: Optical flow ( effective height 0.3-3m)
Accuracy of auto-hover: Horizontal ±0.2m, vertical ±0.3m (under no wind environment)
Receiver protocol: Frsky D8
Flight controller: Lite 1S Pro brushed FC
VTX: 25mW
Camera tilt degree: 25°
Camera: C02 FPV Micro Camera
Transmitter: Literaio2 SE Transmitter
TX mode: Mode 2 (Left stick throttle)
Goggles: VR02 Goggles
Motor: 716-19000KV Brushed motor
Propeller: 31mm 4-blade 0.8mm shaft hole
Takeoff weight: 35g(with battery)
Power system: 1S
Battery*: BT2.0 300mAh 1S 75C Battery
Flight time: 4-5min
Flight distance: 80m (in wide & undisturbed environment)

Package
1 * Cetus Brushed Quadcopter
1 * LiteRadio2 SE Transmitter (Frsky D8 Protocol)
1 * VR02 FPV Goggles
2 * BT2.0 300mAh 1S 75C Battery
1 * BT2.0 Battery Charger and Voltage Tester
1 * USB Charging Cable (Type-C)
1 * Type-C Adapter
1 * Prop Removal Tool
4 * 31mm 4-Blade Props
2 * User Manual
1 * Portable Storage Bag
1 * Phillips Screwdriver