Waterfall Window Film Static Cling Film,Little Waterfalls Flow on Rock Stairs Surrounded by Long Plants Earth Stain Glass for Bathroom Kitchen Room

Waterfall Window Film Static Cling Film,Little Waterfalls Flow on Rock Stairs Surrounded by Long Plants Earth Stain Glass for Bathroom Kitchen Room

Privacy Protection:This decorative window film can Instantly change your see-through glass into a Pattern frosted glass panels. Provides Privacy and Allows the Lights in.Privacy Level :★★★★★ Top Private Window Films (Outstanding Privacy Protection Even Works For Bathrooms). Widely Suitable For Any Places: Kitchen, Bedroom, Bathroom, Living Room, Dining Room, Office, Hotels, Classroom, Lobby, etc. Easy use Window Film:The process of installation does not need glue due to its unique static cling. If you tear it off, the privacy window film won’t leave any glue on your glass. Just stick a lot of water (soapy water would be better) to the glass surface and you can finish it in minutes Reusable Static Cling:This window film is no-glue, easy to position and remove without any residue or any harmful substances release. So it can be reused if not damaged or smudged. Reusable:This frosted window sticker can be used for many times, anytime you want to. You can remove it and stick again and won't worry about stain or damage left. Important Tips for You:The window film size is 23.6 x 35.4 inchh(60 x 90cm), please order the right size according to your needs.

Specification: 24"x36" inch

Material: Vinyl

Thickness: 0.2mm / 7.8 mil

Package Included:

1 x window film

Where to use?

-The static cling decor window film applies to any smooth glass surface, it can be trimmed or combined to fit any size window.

-You can use window films on window glass of living room, bathroom, bedroom, kitchen, and use on front door window, sliding door window, french window, cabinet panel. This window film fits for office, house, restaurant, bar, shop and home etc.

Installation Step:

1. Cut film to required size, about 1 inch larger than the window

2. Clean the glass surface

3. Use the spray bottle wet the glass with water, more water more better (JUST WATER, NOT USE GLASS CLEANER)

4. Peel off the back protective film (Sometime you will find it is difficult to tear off the protective film, you can try to tape the two sides with adhesive tape then peel off)

5. Stick film on glass (Put the smooth side to window, don’t put the frosted side to the window)

6. Scrape a few more times with squeegee or abandoned credit cards to ensure the bubbles and water are completely removed

7. Trim the margin and cut off the excess edges

Tips:

1. This film is suitable for smooth, flat clean glass surface. Do not use on rough, uneven, frosted glass or other material.

2. Please make sure to peel off the backing film before applying and apply the smooth side of film to glass. Otherwise it will not be firmly adhered.

3. This window film can show the colors when the light is going through or reflected, so usually you can’t see the colors of window film before install.

4. Use a hair dryer to soften the film under cold weather.