Jienk 10PCS 1/4 Inch Tube OD Pneumatic Cap Plug Fitting, PPF-1/4 Plastic Push-in Connect Fitting

Jienk 10PCS 1/4 Inch Tube OD Pneumatic Cap Plug Fitting, PPF-1/4 Plastic Push-in Connect Fitting

【Durable】This fitting has PBT body with POM release button and zinc alloy ferrule. Operating Pressure: 0~145 Psi. High pressure resistance, corrosion resistance and a long service life. High pressure resistance, corrosion resistance and a long service life. 【Good Sealing Performance】Stainless steel tube gripping claw makes the grip force stronger, not easy to trip or leak. 【Push Lock】Quick connect fittings easy to install and remove, just one touch to connect the tube. The release ring adopts ellipse design, removed conveniently. 360°rotation, after installation, the tube direction can be changed easily. 【Use Tube】PU / PA / PE 【Wildly Application】Working Temperature: 32～140°F. This male straight quick release air fitting is most used in the field for low-pressure hydraulic and pneumatic systems such as Shop Air, Industrial, Automotive Assembly, Printing, Packaging,as well as moving parts such as cylinder and air compressor. Specifications：
Shape: Straight
Push-in Tubing O.D: 1/4"
Body Material: PBT
Release Button: POM
Ferrule: Zinc Alloy
Gripping Ring Material: Stainless Steel
Fluid type: Air, Vacuum
Max Working Pressure: 1.32Mpa
Negative Pressure: -29.5"Hg(-750mm Hg)
Operating Pressure: 0~1Mpa(0~145Psi)
Operating Temperature Range: 0-60℃(32～140°F)
Applicable Tube: PU tube, Nylon tube , Soft PE tube
Package Included：
10 x PPF1/4" Tube OD Push to Connect Cap Plug Fittings

Precaution for Use:
Do Not Use Fittings with Media Other Than Air.
Do Not Use the Product Where Weld Spatters Occur at Places Where There is Excessive Rotation or Vibration of the Fittings.
Do Not Use It in Places Where Metal Powder or Sand Dust is Mixed, such as Adhesion of Other Materials.
Do Not Exceed 145Psi Pressure.
Do Not Use Outside the Service Temperature Range.
Make Sure That the Cutting Surface of the Tube is Vertical, There is No scratch on the Tube Surface or Deformations and the Tube is Not Oval.
Never Apply Tube Joint with Additional External Load( Twisting ,Bending or Pulling).
When Inserting the Tube, It Must Be Inserted into the Bottom.
To Disassemble, Make Sure there is No Air Pressure Inside of the Tube and Push the Release Button against the Body and Remove Tube.