Malahit ATU-100 EXT Antenna Tuner 1.8-50MHz atu100 by N7DDC 7x7 0.96 Inch OLED 3.2 Firmware Programmed with Housing Assembled Machine with USB Cable（

Malahit ATU-100 EXT Antenna Tuner 1.8-50MHz atu100 by N7DDC 7x7 0.96 Inch OLED 3.2 Firmware Programmed with Housing Assembled Machine with USB Cable（

[ATU-100 Version]：Latest program：3.2 version has been programmed.Compared with version 3.1, some bugs have been fixed. [Product Features]：Automatic Antenna Tuner machine with Shell（No battery）,No need to assemble,can use it directly,Automatically tuned developed by N7DDC.Compatible with radio antenna. [High-quality Accessories]：High-quality SMD capacitors, C-channel capacitors, high-quality 1000V high-voltage SMD capacitors, and the PIC chip imported. Really UHF connector. [Remarkably Compact]：The shell is designed by an excellent designer, compact and exquisite.The entire shell (including the front and back panels) is made of aluminum alloy, not PCB board. [What You Get]：ATU-100 Automatic Antenna Tuner machine with Shell（No battery）, 1* DC5.5 x 2.1 power cord , 1 *USB Booster board [The booster board]：(5V boosted to 12V) is connected to the usb cable, and the 5.5 connector power cable is soldered to the booster board.If you use it powered by a portable power bank (not required under normal circumstances) [Note]:Do not try to be lower than 5W,Insufficient tuning may occur within 5W.

The latest firmware version is 3.2：

-SWR greater than 1.1 will automatically activate tuning,and the minimumpower has been changed from 5W to 1W. 3.2 Program can be tunedbelow 5W.However, Too low value may result in insufficiently fine tuning(originaldefault is greater than 5W auto tuning) , please know this beforeplacing an order.

Parameter Description:

-Power supply range: 10-15 VDC

-Max current: 450mA

-Max working power: 100 watts

-Max measured power: 150 watts

-Minimum power for tuning start: 1 watt

-Recommended maximum power while tuning not above 30watts. (after tuningyou can set 100 watts and work on this power)

-Minimum measured power: 0.1 watt

-Step for measurement on powers under 10 watts: 0.1 watt

-Step for measurement on powers above 10 watts: 1 watt

-Power measurement accuracy: 10%

-Maximum inductance set: 8.5 uH

-Minimal step for setting inductance: 0.1 uH

-Maximum installed capacity: 1870 pF

-Minimal step for setting capacity: 10 pF

Package Included:  Weight:550g

-1 x Assembled Automatic Antenna Tuner machine with Shell（No battery）

-DC5.5 x 2.1 power cord*1 (50cm)

-USB to DC2.1 power cord *1

Note:

1.Insufficient tuning may occur within 5W. So do not try tobe lower than 5W.

2.Recommended maximum power while tuning not above30 watts.(after tuning you can set 100 watts and work on this power，Otherwise it will burn easily)

3. You need to use 9-12V for theATU-100 to start. If you use a mobile power supply or a computer USB port tooutput power, you cannot start the ATU-100 because their voltage is too low.