Fogland Misting System: Outdoor Cooling System 32.8FT Misting Cooling System with 10pcs 0.016" Orifice Thread Stainless Steel Mister Nozzle for Patio

Fogland Misting System: Outdoor Cooling System 32.8FT Misting Cooling System with 10pcs 0.016" Orifice Thread Stainless Steel Mister Nozzle for Patio

[Easy to install]: Fogland misting system is pre-assembled, just screw the misting nozzle to the tee, and connect the mister system to the appropriate faucet, then ready to use. [Robust design]: Fogland outdoor misting system equipped with high-quality tubes and tees without breaking or leaking, stainless steel cleanable misting nozzles for anti-blocking. After long-term use, the nozzles can be detachable for cleaning, reducing the cost of use. [Effective misting&cooling]: Misting produced by the Fogland misting cooling system is very soft, the spray flow rate is moderate, so you don't have to worry about excessive wetting， and the coverage of each nozzle is wider can effectively reduce ambient temperature by 3-10°C or 37-50°F. [Extensive application scenarios]: Fogland misting system can be widely used in summer outdoor cooling, such as patio, parasols, fog fans, gardens, greenhouses, trampolines, barbecue parties, birthday parties, etc. [Complete unit]: Fogland misting cooling system is fully equipped with faucet adapters and installation aids that meet the needs of American households. You can use it with confidence.

Design concept:
In summer, people usually worry about greenhouse potted plants and garden plant irrigation because the weather is too hot.
So why not try the flongd irrigation cooling multi-purpose spray set?
Can effectively care for your vegetation perfect through the hot heat, drive out the heat cooling,
reduce the temperature, can also be used to clean your car, for your favorite to take a cool bath,
can also be used for children to play trampoline, make this summer very pleasant!

Product details:
1.Colour:black
2.Size:32FT/10M
3.Suitable for:Garden Backyard Greenhouse Umbrellas Trampoline
4.Package list:32ft/10M misting line*1,stainless steel nozzles*10,spary seat*10,saddle clamps*30,cable ties*30,instruction*1

Installation Steps:
1. It is recommended to installed the misting system at a height of 5m-3m.
2. Connect the adapter to the water tap.
3. Turn on the water tap to wash the system for 1 minute to purge the system and remove any impurities.
4. Screw the misting nozzles to the Tee fittings, except the last one on the end plug.
5. Turn on the water tap to wash the system for 2 minutes to insure that the system is fully purged.
6. Turn the water off and install the last nozzle into the fitting with the end plug.
7. Fix the misting line by the cable ties saddle clamps provided.
8. Turn on the tap slightly until jets are working, enjoy the cooling misting system .
9. Turn off the nozzles, keep them dry and clean when you don't use the misting system for a long time.