100ft KMR400 Low Loss Coax Extension Cable (50 Ohm) N Male to N Male Connector Coaxial Cables for 3G/4G/5G/LTE/GPS/WiFi/RF/Ham/Radio to Antenna or

100ft KMR400 Low Loss Coax Extension Cable (50 Ohm) N Male to N Male Connector Coaxial Cables for 3G/4G/5G/LTE/GPS/WiFi/RF/Ham/Radio to Antenna or

Ultra Low-Loss:This 100 feet cord with N-Male to N-Male Connectors is black in color and it is Ultra Low-Loss Coax Cable,which mean that it incurs a very low loss.Signal loss of this 100 ft cable on 3000MHz is less than 2.3dB that allows transfer of signals over large distances with minimum signal loss. High-quality Materials: The inner conductor of our n type coax cable is copper clad aluminium so it is very efficient and causes very low signal loss, and the cable is heavy duty. The Jacket is made of the flexible and proof-water pvc that could be used so long in the harsh environments in the outdoor. Prevent Coming Off: Our coaxial cable adopt the clamp connector not the crimp type connector so the connector will not easy come off from the cable and all the connections are solid and professionally attached.We use the black heat shrink tube and lined adhesive by heat shrinking to connect the adapter and the coaxial cable . And the length is up to 2.2 in that is longer than others which would prevent the code coming off. Compatibility: This ultra low-loss 400 n cable is designed to work with all devices and appliances with 50-Ohm impedance. Works for any 50 Ohm RF system. Such as an antenna and amplifier,and they can be used inside building or outside buildings. It enables perfectly secure connections between an amplifier to both indoor or outdoor antennae, taps, splitters. Professionally Made: XRDS -RF is a professional manufacturer in producing coax cable. This n to n jumper is swept with USA KEYSIGHT E5071C ENA network analyzers to assure the vswr of the cable less than 1.1. XRDS -RF is committed to improving the lives of our customers, and this cable will give you unmatched product quality. All of our items come with a full year of warranty. KMR400 n type cable to hold the shield at a uniform distance from the central conductor, the space between the two is filled with a dielectric designed to maintain the proper spacing between conductor and shielding to assure maximum signal transmission and lowest loss.


KMR400 low loss coax cable n-male to n-male is designed to transmit the maximum signal to your antennas. specifications with aluminum foil and copper conductors for less signal loss in runs up to 200 feet


KMR400 ham radio antenna shielded cable can be bent and moderately twisted without negative effects, and can be strapped to conductive supports without inducing signal interference


Specification

Nom. Characteristic Impedance:50ohm
Nom.Min. Bend Radius(Install):2in
Nom.Max.Operating Frequency:6000MHz
Nom.Operating Temp:-40 to 80℃
Nom. Maximum tensile strength:21.3Ib