YWLRONG LCD for Fitbit Charge 5 Watch Display Touch Screen Digitizer Assembly for Fitbit Charge 5 Replacement with Kit(Black)

YWLRONG LCD for Fitbit Charge 5 Watch Display Touch Screen Digitizer Assembly for Fitbit Charge 5 Replacement with Kit(Black)

Compatibility ： For Fitbit Charge 5 LCD Display LCD Display.Please make sure your watch model before purchase. Application ： Use for fix a faulty screen,and cure-replace cracked, broken, dead pixels, touch is not working, touch response issues, display problems,wrong color issues ,non-functional screen.etc. Quality Guarantee ： All products have passed strictly QC double tested and 100% in good condition before shipment.To Make sure no scratch/no dead area/ no dot pixel or line in the screen. Easy to Install ： High quality for Fitbit Charge 5 LCD Display.LCD screen replacement andrepair tools, help to install more convinient and easilyOur screens are packed in strong boxes,avoid damage during shipping. Installation Suggestions ： Please test the screen before installation, make sure the screen is normal to use.Not recommend Installation without any experiences.If you need help and link of installation guide video, please leave a message Tips for screen replace:
Before installation
1. Disconnect the battery cable before installation or make sure your Watch is powered off;
2. Make sure Watch has been upgraded to the latest version
During installation
1. Please mark each screws place and put the screws you removed on the right place. Due to the different length and size of screws, if put them in wrong screw holes, they may damage the screen;
2. Treat flex cables gently, use tools instead of your finger;
3. Make sure the flex cable is properly connected .Don't force the connector together until they are properly lined up;
After installation Reboot
If you meet with some issues, please try this: Power off your Watch,disconnect all the cables including the battery cable,clean the connector on the motherboard,reconnect the cables, leave the phone alone for a while in a dry environment, a hard reset of your Watch,power on.
If After installation display can’t touch well /Watch can’t unlocked/ has screen line.Please use the FPC connector to connect Main board again,make sure the connector was tight and connect on the right position.

Package:
1* Watch Display Replacement for Fitbit Charge 5
1*Set Tools