Adjustable Aluminum Air Suspension Kits Electric Center Stand for Harley, Rear Ride Suspension Compressor Fit for Harley Touring Street Glide Electra

Adjustable Aluminum Air Suspension Kits Electric Center Stand for Harley, Rear Ride Suspension Compressor Fit for Harley Touring Street Glide Electra

Fitment: For Harley Touring Models 2009-2016, CAN NOT Fit With The Cross-Under Exhaust Pipes. MRI Center Stand: Made of Metal+Aluminum+Stainless steel; this item can be bolt on in minutes and use a linear actuator to raise and lower the legs electronically; Two Aluminum legs provide a very sturdy base,and allowing the motorcycle to sit upright while parked Air Ride Kit: This is a complete kit assembled to replace your stock touring shocks with height-adjustable air shocks. Fully Collapsed approx. 9.64inches(24.5cm); fully extended 14.17inches(36cm) This kit will allow you to lower your bike 2 to 3 inches with all of the air released; The air it up to stock ride height for a smooth ride in a matter of seconds Condition: Aftermarket 100% Brand New and High Quality MRI Center Stand & Air Ride Suspension Kit; Installation instructions Included
Center Stand:
This item can be bolt on in minutes and use a linear actuator to raise and lower the legs electronically.Two Aluminum legs provide a very sturdy base,and allowing the motorcycle to sit upright while parked.
Air Ride Kit:
Waterproof,dust-proof (IP)IP54
Output Voltage：DC-12V
Working Period 15%@100PSI
Maximum Working Voltage:130PSI(9.1KG/c㎡)
Maximum current：14A
Pump's Size(L×W×H)：152mm × 88.5mm × 135mm
The Ventilating Flux:1.27CFM@0PSI, When under 0PSI, the rate of flow is approx.36.0L/MIN.(Calculation formula:1CFM=28.3185 L/MIN)
This is a complete kit assembled to replace your stock touring shocks with height-adjustable air shocks.
Fully Collapsed approx. 9.64inches(24.5cm); fully extended 14.17inches(36cm).
This kit will allow you to lower your bike 2 to 3 inches with all of the air released.The air it up to stock ride height for a smooth ride in a matter of seconds.
The threaded joints use all nickel-plated brass high-flow high-pressure push-to-connect fittings, the tees are made of plastic, and a manifold-style dump valve block for optimum. This kit includes all of the components for a fully functional, fully height adjusta ble rear air suspension.With this kit, you can ride with zero air pressure without rubbing. That means you can cruise around with your bike SLAMMED, or also if you ever lost air pressure for any reason you can still ride without rubbing your tire against your fender(on most '09-Later models, or '08-earlier models with stock rear tire, contact us for details).
Note:
Installation instructions Included
All of our products are brand new items. Because of a new process for treating, a little bit of paint loss from packaging and long distance delivery as shown on picture. This is normal and will never affect the functionality and safety of the item.
CAN NOT Fit With The Cross-Under Exhaust Pipes.
Before you buy,please check this part to make sure it can fit your motorcycle or not.