DAE AMR130-RN KIT Auto Meter Reading Module with RF Output for 1 Water Meter

DAE AMR130-RN KIT Auto Meter Reading Module with RF Output for 1 Water Meter

For existing building, hard to draw cable between AMR130AN (close to water meter) and CC2030 (close to your router), please choose CC2030 KIT+AMR130-RN KIT+WSC500A to connect them wirelessly. CC2030 KIT Gateway+AMR130-RN KIT+WSC500A can read a water meter with pulse output (like DAE AS200U-75P, MJ-75, PD-100, V-75P, VM-75P and WP-300P) remotely with cell phone, PC and generate billing report. If there is abnormal usage (ex. Broken piping), an email alert will be sent to your cell phone. No IT guy is required. Just connect wires as per 5th picture (see video) & ready to go. If feasible to draw a cable between AMR130AN (close to water meter) and CC2030 (close to your router), it will be more cost-effective to choose DAE CC2030 KIT + AMR130AN KIT. (3rd picture) For monitoring up to 16 water meters remotely with cell phone, PC and generate billing report, you will just need 1 AMR KIT + 1 CC2030 KIT (4th picture). Indoor use only, DAE B1725 watertight enclosure available for outdoor use. DAE Controls LLC is a Minority Business. NMSDC Minority Supplier Certificate is available in DAE Controls Website. Type: Auto Meter Reading Module with rf Output (for Meter like dae as series, mj series, v Series, vm Series and wp Series).
The accessories (included in the listing) are the Power Adapter (output 12v dc, input 120v ac), Din Rail (to install amr130-rn to the wall). We suggest that ul2464-20 cable be used to connect amr130-rn and Water Meter. It can be extended at least 328 feet (100 meters).
Indoor use only, dae b1725 watertight nema 4 enclosure is available for outdoor use.
Modbus Address: 1-254 (default : last 2-digit of serial number)
rs485 Baud Rate: 9600 bps (Used with wsc500a)
Protocol: Modbus rtu
led Indicators: rf tx/rx led, Pulse input led
Communication: rf 900-930mhz (Default: 915mhz)
Auxiliary Power: dc 12-15v / 5.4va
Operating Temperature: -40 to 70c (-40 to 158f)
Operating Humidity: 0 to 90% rh (non-condensing)
rf Transmission Rate: 0.3~62.5 ( Default: 2.4kbs )
Transmitter rf Output Power: 22dbm, 17dbm,13dbm, 10dbm
Antenna Type: Suction type, 3.5dbi
Transmission Range: 5 km (Clear weather, open area without obstacles, antenna 2 meters above the ground.)
Certification: fcc certified
Settable Parameters: Address 0-254; Baud Rate 1200, 2400, 4800, 9600 bps; Decimal Places: 0, 0.0, 0.00; Pulse Divider: 1, 4, 8, 10, 16, 32, 64
Mount: Din Rail, ts35/7.5 or ts35/15
Non-volatile memory retains metering data during power failure
amr130-rn can also collect the data from water meters and send them to remote host through rf and rs485 with third party software.