DWEII VL53L0X Time-of-Flight Flight Distance Measurement Sensor Breakout VL53L0X ToF Laser Range Finder Pack of 4

DWEII VL53L0X Time-of-Flight Flight Distance Measurement Sensor Breakout VL53L0X ToF Laser Range Finder Pack of 4

❃❃The VL53L0X is a great IC, but its small, leadless, LGA package makes it difficult for the typical student or hobbyist to use. ❃❃Working Voltage: 2.6V - 5.5V; Maximum Sensoring Distance: 2m ❃❃A time-of-flight ranging system integrated into a compact module ;Ranging measurements are available through the sensors I²C (TWI) interface, which is also used to configure sensor settings, and the sensor provides two additional pins: a shutdown input and an interrupt output. ❃❃Range from ±3% at best to over ±10% in less optimal conditions ❃❃ you will get 4pcs VL53L0X Time-of-Flight (ToF) Laser Ranging Sensor Breakout

PIN Description

• VDD  Regulated 2.8 V output. Almost 150 mA is available to power external components. (If you want to bypass the internal regulator,

you can instead use this pin as a 2.8 V input with VIN disconnected.)

• VIN  This is the main 2.6 V to 5.5 V power supply connection. The SCL and SDA level shifters pull the I²C lines high to this level.

• GND  The ground (0 V) connection for your power supply. Your I²C control source must also share a common ground with this board.

• SDA  Level-shifted I²C data line: HIGH is VIN, LOW is 0 V

• SCL  Level-shifted I²C clock line: HIGH is VIN, LOW is 0 V

• XSHUT  This pin is an active-low shutdown input; the board pulls it up to VDD to enable the sensor by default. Driving this pin low

puts the sensor into hardware standby. This input is not level-shifted.

Package included:

4* VL53L0X Time-of-Flight Flight Distance Measurement Sensor Breakout