STEPPERONLINE Nema 17 Stepper Motor Bipolar 1.5A 42Ncm 42x42x38mm 1.8deg 4 Wires with 1m Cable and Connector (1 Pack)

STEPPERONLINE Nema 17 Stepper Motor Bipolar 1.5A 42Ncm 42x42x38mm 1.8deg 4 Wires with 1m Cable and Connector (1 Pack)

Nema 17 Stepper Motor with 42Ncm holding troque Bipolar stepper motor ,dimension 42*42*38mm, 2 phase, 4 leads Step angle 1.8deg, 200 step/revolution Rated Current/phase 1.5A & Phase Resistance 2.3ohms Low noise high speed 3d printer stepper motor, build with 1m Cable and Connector This bipolar Nema 17 stepper motor with step angle 1.8deg and size 42x42x38mm. It has 4 wires, each phase draws current 1.5A, with holding torque 42Ncm.

Electrical Specification

*Manufacturer Part Number: 17HE15-1504S
*Motor Type: Bipolar Stepper
*Step Angle: 1.8 deg
*Holding Torque: 42Ncm(59.49oz.in)
*Rated Current/phase: 1.50A
*Phase Resistance: 2.3ohms
*Inductance: 4.00mH ± 20%(1KHz)

Physical Specification

*Frame Size: 42 x 42mm
*Body Length: 38mm
*Shaft Diameter: Φ5mm
*Shaft Length: 23.5mm
*D-cut Length: 20mm
*Number of Leads: 4
*Lead Length: 1000mm
*Weight: 280g

Connection

A+: Black, A-: Blue, B+: Green, B-: Red

WARNING

***On some systems, the middle 2 wires on the motor side are swapped. This is easy to fix by slightly prying back the white nubs and swapping the wires. Otherwise they work fine.***

Make sure the motor connect to a constant current or chopper drive controller before you test motor.
Connecting the motor directly to a power supply will destroy the motor.