Focal FDP6.900V2 Full Range Class D 6-Channel Amplifier

Focal FDP6.900V2 Full Range Class D 6-Channel Amplifier

RCA input can use a BTL source or common ground source. RCA switch select balanced floating ground or grounded to minimize noise. Each input has a peak limiter to prevent severe distortion and speaker damage. It allows light clipping. Each channel has variable high pass crossover: 50 Hz to 4000 Hz, 12 dB Linkwitz-Riley Each channel has variable low pass crossover: 50 Hz to 4000 Hz, 12 dB Linkwitz-Riley Each channel has variable band pass crossover: 50 Hz to 4000 Hz, 12 dB Linkwitz-Riley FEATURES: Very small size for power output Can be used in 3, 4, 5 & 6 channel modes High-level input, compatible with OEM Stereo Easily accessible settings Remote sub control Invisible mounting bracket Highest level of crossover flexibility DETAILS: RCA input can use a BTL source or common ground source. RCA switch select balanced floating ground or grounded to minimize noise. Each input has a peak limiter to prevent severe distortion and speaker damage. It allows light clipping. Each channel has variable high pass crossover: 50 Hz to 4000 Hz, 12 dB Linkwitz-Riley Each channel has variable low pass crossover: 50 Hz to 4000 Hz, 12 dB Linkwitz-Riley Each channel has variable band pass crossover: 50 Hz to 4000 Hz, 12 dB Linkwitz-Riley Channels 5, 6 in bridged subwoofer mode , 24 dB Linkwitz-Riley Subwoofer remote volume control includes a clipping indicator light. Recommended DC voltage operating range 11.5 to 14.4 volts. Minimum DC voltage operating range 8 to 16 volts. Install an 80 AMP fuse at the battery. SPECIFICATIONS: Power: 6x150wRMS into 4ohms @ 1%THD 6x200wRMS into 2 ohms @ 1%THD 4x150wRMS into 4 ohms + 1x500wRMS into 4ohms (Ch5+6Bridged) @1%THD 4x200wRMS into 2 ohms + 1x500wRMS into 4ohms (Ch5+6Bridged) @1%THD Do NOT bridge into 2 ohms. All power ratings are at 14.4v DC. Frequency response: 5Hz–25kHz Signal/noise ratio: 90dB Input Sensitivity: 200mV + 10V Slew Rate: 13 V/ uS Protections: Short-circuit, thermal overload, polarity reversal, DC