DieseRC 433Mhz Wireless Remote Control Switch with 328ft Long Range Radio Control DC 12V 24V 36V 48V 12V-75V 40A Relay Receiver and 2 Transmitters

DieseRC 433Mhz Wireless Remote Control Switch with 328ft Long Range Radio Control DC 12V 24V 36V 48V 12V-75V 40A Relay Receiver and 2 Transmitters

【Great design】433Mhz RF wireless remote control switch.Stable and reliable performance with high reception sensitivity (> - 105dBm). Strong signal can pass walls, floors, doors.It can be controlled within 50 meters distance with no obstacle.There is an antenna extend out of the box, so that you can stretch it for the better signal reception. 【Easy to use】Extremely easy to set up and reset. There are 3 operating mode(momentary/toggle/latched mode) can be chosen.You can easily set up by yourself depends on your needs. The operating mode of the product is adjustable.This item has already been set up in latched mode. And "ON" button to turn on, and "OFF" button to turn off . 【More Flexibility】The receiver adopts 40A relay, which can load high-power electrical appliances to ensure long-term stability control. Each receiver can store about 20 transmitters. And One transmitter can control multiple receivers too( the transmitter need to match with receiver ). 【Quality Assurance】High-quality relay that can be used over 100,000 times.Let this product can be more long-lasting and stable to use.The high-power terminal can withstand a current of 40A, so that this product can have a good effect even when the current is unstable. The receiver is suitable for 12V~75V voltage, it is more flexible to use. 【Wide Application】Products can be used in homes, farms, factories, offices, laboratories, supermarkets and so on.You can remotely operate every device connect with the relay receiver through the remote control. such as lights, pump, wireless security alarm, fan, Lamp, wireless door alarm, ventilation device, monitor, printer, fountain and other electrical equipment etc. Package include:
1x Relay Receiver
2x Transmitters (contain battery)
1x Product manual

Parameter:
-Receiver Working voltage: DC 12V~75V
-Max current: 40A
-Quiescent Current: 97dbm
-Amount of storage remote controls: 20 pieces
-Support encoding: 1527 Learning code
-RF Operating mode: ASK superheterodyne wireless reception
-Receiving range: Open space is more than 50 meters
-Pin: N/L
- Operating mode: Momentary Mode/ Toggle Mode/ Latched Mode
-Battery: 2x CR2016(contain)

Usage (Operation Mode):
Momentary Mode:
1. Press and hold “ON” key, relay will turn on;
2. Release “ON” key, this relay will turn off.
Toggle Mode:
1. Press “ON” key, relay will turn on;
2. Press “ON” key again, this relay will turn off.
Latched mode:
1. Press “ON” key, relay will turn on;
2. Press “OFF” key, relay will turn off.

Reset:
Press the learning button (on the Receiver) 8 times. succeed.
Note:
After reset, all the remote controls cannot work anymore.

Programing
1. Press the learning button (1 time for Momentary mode, 2 times for Toggle mode). Wait for 3 seconds;
2. Press one button. Succeed.

Programing latched mode
1. Press the learning button 3 times. Wait for 3 seconds;
2. Press “ON” key.
3. Press “OFF” key. Succeed.

Note: This item has already been set up in latched mode. "ON" key for turn on, and "OFF" key for turn off