X AUTOHAUX 0280158020 Fuel Injector for Dodge Nitro 2007-2011 for Mitsubishi for Raider 2007-2009 for Jeep Liberty 2004-2012 for Dodge Dakota 2004-

X AUTOHAUX 0280158020 Fuel Injector for Dodge Nitro 2007-2011 for Mitsubishi for Raider 2007-2009 for Jeep Liberty 2004-2012 for Dodge Dakota 2004-

The Part Number(OE Number): 62389, 0280158020, 530327O1AA, RLO32701AA Fitment: for Dodge Nitro 2007-2011, for Mitsubishi for Raider 2007-2009, for Jeep Liberty 2004-2012, for Jeep Grand Cherokee 2005-2010, for Jeep Commander 2006-2010, for Dodge Dakota 2004-2010, for Dodge for Ram 1500 2004-2010, for Dodge Durango 2004-2009 Fuel injector enables fast start up in cold environments; direct replacement of your old or broken injector, and no modification needed. Product Included: 1 x Fuel Injector; Material: Metal, Plastic; Pin Number: 2; Orifice Type: 4 Holes Disc. Flow rates at 43.5 psi / 3 bar 20 lb per hour 151.2 G per min.(N-Heptane)210.2 cc per min Note: This is a non-OEM product, accessory only! Please make sure that the OE number and make/model/year/trim are the same as your OEM product before buying! Description:

Made of metal and plastic material which is durable.
The good impedance fuel injector has been tested and exactly matches the internal coil resistance and fuel flow rate of the OEM fuel injector.

Specification:
Material: Metal, Plastic
Color: Black
Voltage: DC 12V
Flow rates at 43.5 psi / 3 bar 20 lb per hour 151.2 G per min.(N-Heptane)210.2 cc per min
OE Number: 62389, 0280158020, 530327O1AA, RLO32701AA
Pin Number: 2
Dimension: 7.8x3x1.4cm / 3.07"x1.18"x0.55"(L*W*H)

Fitment:
for Dodge Nitro 2007-2011
for Mitsubishi for Raider 2007-2009
for Jeep Liberty 2004-2012
for Jeep Grand Cherokee 2005-2010
for Jeep Commander 2006-2010
for Dodge Dakota 2004-2010
for Dodge for Ram 1500 2004-2010
for Dodge Durango 2004-2009

Note:
This installation should be done by an experienced mechanic who has access to a factory service manual and all required tools!
This is a non-OEM product, accessory only!

Installation:
Step 1. Make sure the engine is cool down. Disconnect the battery.
Step 2. Remove the bolts and brackets from the fuel rail.
Step 3. Disconnect the plug on each injector.
Step 4. Lift the fuel rail and remove the injector from the fuel rail.
Step 5. Press the new injector into the rail. Reattach the fuel rail and put the injectors in their respective holes.
Step 6. Bolt down fuel rail. Reattach fuel line. Plug in injector connectors. Reconnect battery.
Step 7. Double check for fuel leaks before and after starting the engine.

Product Included:
1 x Fuel Injector