Mugteeve XLR Male to 1/4" TRS Cable Balanced - 25FT Quarter Inch Stereo to XLR Microphone Cord Adapter, Nylon Braided, OFC Shielded, Red Color, for

Mugteeve XLR Male to 1/4" TRS Cable Balanced - 25FT Quarter Inch Stereo to XLR Microphone Cord Adapter, Nylon Braided, OFC Shielded, Red Color, for

【Balanced 1/4" TRS to XLR Male Cable】This xlr to 1/4 quarter inch cable is used to output balanced/unbalanced audio signal from 1/4" port to xlr input device. Output device can be mixer, dj controller, podcast, keyboard, electronic drum, etc. These devices usually has 1/4" bal/unbal output port, which are usually marked with main out, control room, FX send, Master out, Sub out, Stereo out, Stereo return, etc. Input devices are usually powered speaker, stuido monitor, interface, AMP, etc. 【TS replacement & active speaker】This stereo balanced trs cable can be used on unbalanced 1/4" mono TS port, please don't worry, only issue is that you can can still only get unbalanced output. For speaker connection, please only use for powered speakers, as passive speaker will need a preamp before it can play the sound. Please do not use to connect guitar to xlr mic input, due to mis-match impedance, your device will not receive the guitar signal. 【 Noise-Free & Heavy Duty 】This trs to xlr adapter cord is braided design with nylon coating. The TRS tip is gold plated, it will transfer a more clear signal with no noise. Internal construction includes OFC spiral, silver paper coating and threaded cotton. These materials are all used to reduce signal interference, 90% OFC can keep out RFI and EMI, no buzz or hum will produce. We also have a drag-proof solution in the connector, so the internal wire won't break out easily. 【15FT X2】Package will come with 2X 3pin XLR male to TRS cables, each is 25FT/7.5meters, red color. Please double check if this length is right for you. 【Customer Support】We offer 2 years after-sales support for this trs to xlr male cable, for any issues within 2 years, customers can come back for replacement. Our technical support is also online for 24hours. Should any issues happened after package received, customer can message us from order page. We'll give response within 12 hours. 25 feet/7.5 meters 3pin XLR male to 1/4 quarter inch 6.35mm trs balanced stereo audio cable adapter


Specification
● Length: 25 feet (7.5 meters), 2pack
● Conductor: 24 AWG OFC (oxygen free copper)
● TRS male: 1/4 inch / 6.35mm, balanced type
● XLR male: 3 pin balanced
● Shield: 90% OFC Spiral
● Coating: braided nylon + PVC


Application:This TRS to XLR male cable is used to output balanced/unbalanced signal from 1/4" port to XLR input device.
General 1/4inch bal/unbal output device:
Mixer, DJ controller, Keyboard, Effects, AMP, Electric drum, Audio interface, etc.
Normal 1/4inch bal/unbal output port:
main out, control room, FX send, Master out, Sub out, Stereo out, Stereo return, etc
Suitable XLR input device:
Studio monitor, PA, Mixer, AMP, etc.


Notice:
● Balanced 6.35mm TRS cable can be used on 1/4inch unblanced mono port, please don't worry. Only issue is that you can still only get unbalanced output.
● For speaker connection, please only use for powered speakers, as passive speaker will need a preamp before it can play the sound.
● Please do not use it to connect guitar to xlr mic input, due to mis-match impedance, your device will not receive the guitar signal.


Features
● No loss of signal, extremely low noise;
● braided nylon design, flexible feeling;
● thick cable with 0.3inch diameter;
● Sturdy connectors with 2 years after-sales support


Warranty:
We offer 2 yeas after-sales support for balanced 1/4" to XLR male cable. If you meet any issue when you connect the cable, please message us via your order page, our customer support will give response within 12 hours. For any failure by non-human factors within the warranty, we'll arrange replacement or fees refund.