ChillWaves Brass Pneumatics Reusable Replacement Fitting，Hose-End Repair Fitting 3/8" ID Hose（3/8" Barb）x 1/4" NPT Rigid(10-PACK)

ChillWaves Brass Pneumatics Reusable Replacement Fitting，Hose-End Repair Fitting 3/8" ID Hose（3/8" Barb）x 1/4" NPT Rigid(10-PACK)

SIZE - 3/8" ID x 1/4" NPT Reusable Hose-End Repair Fitting. Note, NPT thread is the nominal pipe size and does not represent the actual diameter, please refer to the dimension drawing for specific diameter. MATERIAL - Made of high-quality brass, with strong wear and corrosion resistance, high compressive strength, durability, low magnetic permeability and high temperature ductility. USE - for hose extension and repair, temperature and pressure resistance, good sealing and repeatability, no need for welding and flaring tools, easy disassembly, installation and maintenance, etc.It is suitable for gases, water, oil and non-corrosive liquids. WORKING PRESSURE & TEMPERATURE - 1200PSI maximum working pressure, temperature range -65°F to +250°F (-53°C to +121°C) NOTICE - NPT is a tapered pipe thread with a 60° taper and generally cannot be screwed to the end.

Air tool fittings are parts of the air pressure system that act as connections, controls, reversals, shunts, seals and supports.

OPERATION STEPS：

1. Cut off the damaged part of the hose, first pass the hose through the nut holding the seal.

2. Thread the hose into the same size barbed head.

3. Tighten by hand or with a wrench to prevent the hose from falling off.

4. For PU, PVC, PE and other plastic hoses. If you want it to work on rubber hoses, please check the size before buying and you may need to thin the outer layer of the hose.

5. When purchasing pipe fittings, consider the application as this will affect the material type, shape, size and desired durability. Fittings are threaded or unthreaded and come in many shapes, styles, sizes and schedules (wall thickness)

PACKAGE INCLUDED:

10 x 3/8" ID Hose x 1/4" NPT Reusable Hose-End Repair Fitting

1 x Teflon tape