Rear Hatch Struts Tailgate Shock Fit for Ford Edge 2007-2014, Rear Liftgate Lift Support Shocks Spring Replace 6120, SG304084, 2Pcs

Rear Hatch Struts Tailgate Shock Fit for Ford Edge 2007-2014, Rear Liftgate Lift Support Shocks Spring Replace 6120, SG304084, 2Pcs

Compatible Models: Fit for Ford Edge 2007 2008 2009 2010 2011 2012 2013 2014. Suitable for rear hatch. Interchange Part Number: Compatible with 6120, SG304084, ‎7T43 78406A10 AD, 7T4378406A10AD, 7T4Z 78406A11 A, 7T4Z78406A11A. Please select the appropriate parts based on your model to achieve the best results. Product Specifications: Extended Length: 22.05 inches (center to center), compressed Length: 13.86 inches (center to center). Easy Installation: No special tools are required during the installation process, and beginners can easily install it in just a few minutes. Customer First: Whether you encounter any issues during purchase or are not satisfied with the product after receiving it, please feel free to communicate with our customer service at any time, and we will provide you with a solution.

Compatible with:For Ford Edge 2007-2014

Extended Length: 22.05 inch (560mm, center to center)

Compressed Length : 13.86 inch (352mm, center to center)

Youxmoto lift support shocks meets original specifications and perfectly fit for 6120, SG304084, ‎7T43 78406A10 AD, 7T4378406A10AD, 7T4Z 78406A11 A, 7T4Z78406A11A. Please select the appropriate parts based on your modle to achieve the best results.

Install lift support to free up your hands. When opening the front hood/rear tailgate/rear window glass, the struts will firmly support it without the need for your head support, making it easy for you to operate.

Before Replacement: 

The original installation status and all provided accessories checked to identify reusable components. When dismantling the old elevator bracket, it is necessary to properly preserve these available parts for future installation of the new bracket.

When Replacing: 

When removing the old lifting bracket, always use your hands to firmly support the engine hood, rear window, or hatch during the replacement of the pillar to prevent sudden detachment and collision. Subsequently, gently pry open the iron plate on the connector with a flat head screwdriver to open the clip and remove the end. The other end is also operated using the same method. If the end of the pillar is fixed with an iron plate, simply unscrew the nut and bolt to remove the other end.

Please Note: Do not dismantle both pillars at the same time. Follow the step-by-step sequence of "dismantling one - installing one - then dismantling the other - then installing the other".