FYSETC Prusa Build Plate MK52 MK3S+ MK4 Spring Steel Surface: Textured PEI - PET-CF Double-Sided Flexible PEI Sheet 253.8x241mm Hot Bed Cover for

FYSETC Prusa Build Plate MK52 MK3S+ MK4 Spring Steel Surface: Textured PEI - PET-CF Double-Sided Flexible PEI Sheet 253.8x241mm Hot Bed Cover for

Upgrade 3d printing surface: Janusbps printing platform for MK52 - MK3 - MK3S - MK3S+ - MK4 - MK4S+ -MK3.9 3D printer, not for XL. Textured PEI Powder (Gold) + PET-CF Coating sheet (Black), both sides can be used. Compatible with various kinds of 3d printing material, such as PLA, PETG, ABS, TPU, TPE, HIPS, PA-CF, WOOD etc. Recommend ABS on the Powder-coated bed. The pattern that gets transferred is very cool Double sides Build Plate: One side textured pei powder(Gold) + another coated PET-Carbonfiber sheet, gives you two Different experiences on one plate just by flipping it over. The matte texture makes it easier for the printing material to adhere to the surface, especailly for ABS. So does the new side. It leaves a smooth finish inside with the beautiful-texture finish. The PET-CF surface has grids to help observe nozzle positioning easily Solution for first layer adhesion: Do Not sand on this CarbonPET bed to avoid permanent damage.** No glue, No tap, Adjusting an Appropriate Z value is very important, here my setting value is -0.945 for reference, if too low causing a filament buildup and easily scratch the print bed. Too high, the prints come off the build plate, can't stick onto the hotbed. Key factors for a good layer: Turn off the fan and Slow down the speed to 100 when printing. A roll of dry filament also helps Applicable Model: Size: 253.8x241mm/10x9.48 inch, compatible with Prussa i3 MK52 MK2.5 MK3 MK3s that has the magletic hotbed itself. Please re-measure your hoted bed before ordering, not rely the machine's build volume which is smaller than that of the bed Made of stainless steel, Flexible, removable, high strength and heat resistance, Three-Layer design, thicker and more durable. Textured PEI Powder side can easily handle temperatures up to 190°C and Carbonfiber side can work with temperature up to 100℃. It's easy to remove the printed matter from the platform by bending slightly. Through hundreds of experimental tests, repeated use is still as new What's in the box? 1pc 253.8X241mm Double-sided Spring Steel Plate, no sticker base, for MK52 MK3 MK3S MK3S+. Easy to install and high temperature resistant. If for better adhesion, you can slightly sand it with the sandpapers. Prints come off the surface easily when the temperature of the heated bed reaches room temperature. If the print is still stuck, gentle flexing of the plate will help remove it.