JAYO Matte PLA 3D Printer Filament 1.75mm Black, Matte Surface Conceals Layer Lines, 1.1kg (2.42 lbs) Spool, Accuracy +/- 0.02 mm, Fit Most FDM

JAYO Matte PLA 3D Printer Filament 1.75mm Black, Matte Surface Conceals Layer Lines, 1.1kg (2.42 lbs) Spool, Accuracy +/- 0.02 mm, Fit Most FDM

Premium Matte Finish: Compared with normal PLA 3D printer filament, PLA matte filament has premium matte finish. Matte PLA filament's good layer adhesion and low shrinkage make the printing result better Neatly Wound Filament: JAYO 3D printer filament is neatly lined up, which can avoid filament tangling during the printing process, reducing the risk of clogging and greatly increasing the printing success Precise Diameter Accuracy: JAYO PLA Matte 3D printer filament has 1.75 mm diameter, dimensional accuracy +/- 0.03 mm, accurate diameter making it suitable for almost FDM 3D printers Clog-Free and Bubble-Free Performance: Matte PLA filament 1.75mm has better flowability, which effectively reduces clogging during printing. The plastic vacuum packaging and desiccant make filament less susceptible to moisture Recommended Print Settings: We recommend printing the Matte PLA filament at a nozzle temperature of 210-230C, bed temperature of 50-65C, printing speed of 50-100mm/s

Matte PLA Filament 1.75mm, JAYO 3D Printer Filament PLA Matte 1.1KG, Neatly Wound Filament, Dimensional Accuracy +/- 0.03 mm, 1.1 KG Spool(2.42 LBS), 363 Meters, PLA Matte

FAQ: 

● Why can't the filaments stick to the build bed easily?

● Please do 3 steps checking！

① Temperature

Please check the temperature(bed and nozzle) settings before printing and set it suitable.

② Building Bed

Please check if the bed is level, make sure the nozzle doesn't too far or too close to the bed.

③ Speed

Please check if the printing speed of the first layer is too fast(Recommended: 20-40mm/s).

Recommended Settings:

● Nozzle Temperature: 210°C - 235°C (410°F - 455°F)

● Bed Temperature: 55°C - 65°C (131°F - 149°F)

● Printing Speed: 50-100(mm/s)

Notes

● Please insert the filament into the side holes after use to avoid tangles.

● Feel free to message us if you have any questions about the filament.

● Please stored the 3D printer filament in a sealed bag or box after using it.