BJTDLLX 2 Stroke 18HP Outboard Motor, Long Shaft Outboard Motor Boat Engine, 246CC Heavy Duty Fishing Boat Marine Engine with CDI Ignition System

BJTDLLX 2 Stroke 18HP Outboard Motor, Long Shaft Outboard Motor Boat Engine, 246CC Heavy Duty Fishing Boat Marine Engine with CDI Ignition System

【2-stroke 18HP Outboard Engine】2-stroke 18HP long-shaft outboard engine (4500 to 5500 rpm) provides you with strong power to drive fast and save a lot of time and energy. 6.34 gallons of large-capacity fuel tank provides you with long endurance capacity to meet the needs of short/long distance travel. Many cooling holes and water cooling systems provide excellent heat dissipation capacity to prevent the engine from burning out after a long time of use. 【High Quality Material】2-stroke 18-horsepower long-shaft outboard engine is made of solid aluminum alloy. The manual start function allows you to easily operate by pulling the start rope and opening the speed switch on the handle. Its long anti-slip handle (20 inches long) is easy to grasp. The red stop button allows you to press for a few seconds to stop the engine. 【Flexible Steering】The outboard engine has forward gear, neutral gear and reverse gear as well as 360 degree steering function, which allows you to flexibly control the direction of the ship. Continuously variable speed and constant speed cruise function enable you to easily adjust the driving speed and stable constant speed navigation, bringing you a more comfortable user experience. 【Application】This outboard motor is applicable to small ships of different materials (less than 4.9 feet in width and 19.7 inches in length), such as inflatable boats, iron boats, plastic boats, fiberglass boats and wooden boats. It is widely used in fishery, aquaculture, outdoor exploration, etc. The maximum load of outboard engine is 2204 pounds to meet different requirements (the heavier the load, the slower the speed). 【Gear Oil Filling Method】There is a screw on the gear box, unscrew the screw to add gear oil. Each outboard engine is filled with gear oil before leaving the factory, so it does not need to be refilled for the first time. After that, add it according to personal use and check it every ten hours. ✅ We can provide CE certificate and certificate of origin.

Specification

Material: Aluminum Alloy

Color: Black

Model: 18HP Horsepower Long Axis

Displacement: 246CC

Gear Ratio: 2.08 (27:13)

Number of Cylinders: 2

Speed: 4500-5500RPM

Gear: F-N-R

Refueling Method: 92 Unleaded Gasoline is Recommended

Oil Tank Capacity: 24L/6.34gal

Load-bearing Capacity: 500-1000kg/1102-2204lbs

Ignition System: CDI

Cooling System: Water Cooling

Control System: Tiller Control

Start System: Manual Start

Propeller Specification: 23.5cm/9.25in (Length) * 20.3cm/8in (Diameter)

Suitable Stern Plate Height: 45cm-55cm/17.7*21.7in

Cylinder Diameter * Stroke: 56mm/2.2in*50mm/2in

Recommended Engine Oil: 2 Stroke Engine Oil

Mixing Ratio: Fuel: Oil = 50:1

Trim and Tilt System: Manual Tilt

Net Weight: 28kg/61.7lbs

Gross Weight: 30kg/66.1lbs

Package Size: 133*71*38.5cm/52.4*28*15.2in

Product Size: 87.3*33.2*105.3cm/34.4*13.1*41.5in

Package Included

1x Outboard Motor

1x Flameout Rope

1x Oil Pipe

1x Sealing Ring

1x Paper Pad

1x Spark Plug

1x Start Rope

1x Water Pump Impeller

1x Cotter Pin

1x Fuel Tank

1x English Manual

Other Tools

Notes

1. The two-stroke outboard must use a mixture of No. 92 gasoline and two-stroke engine oil.

2. The volume ratio of gasoline and oil during the running-in period of the new machine is 25:1.

3. After the running-in period, the volume ratio of gasoline and oil is 50:1.

4. Special attention: gasoline and engine oil must be pre-mixed and stirred evenly, and then poured into the fuel tank.

5. The outboard motor must be started in water, do not start the engine on shore.