ATNSINC 4Pcs Type-C USB 5V 3.1A Boost Converter Step-Up Power Module IP5310 Mobile Power Bank Accessories with Switch LED Indicator (Type-C 3.1A)

ATNSINC 4Pcs Type-C USB 5V 3.1A Boost Converter Step-Up Power Module IP5310 Mobile Power Bank Accessories with Switch LED Indicator (Type-C 3.1A)

Small and easy to use, and to ensure limited heat dissipation volume 3.1A, fast and stable output. Support filling while placing; 3.1A synchronous boost conversion output; TYPE-C supports single port input and output. Output overcurrent, overvoltage and short circuit protection; Input overvoltage, overcharge, overdischarge and overcurrent discharge protection. 4 LED power display; Boost efficiency up to 93%; Double click the key to close the output, and click to open the output; Automatically detect phone insertion and removal.

Instruction:

1. Before connecting the battery, connect the charging head of the mobile phone through the type-c data cable, and check that the four lights turn on in turn to confirm that the module chip functions well.

2. Use a multimeter to measure the prepared battery voltage, and ensure that the battery voltage is between 3.0-4.2V. If the voltage is higher or lower than this range, the battery may fail or is not applicable to the battery type.

3. After ensuring that the battery is free of problems, do a good job of static protection, prepare thick wires for welding, pay attention to the positive and negative electrodes, and the reverse plate must be burned.

4. The charging input can be connected to the charging head through the type-c interface, or it can be connected to 5V through the interface marked in blue in the figure above. The input current of port C should be greater than the input current of the welding interface (the input battery terminal of port C can be charged by 3A, and the maximum input battery terminal of the welding interface is 2A).

1. 3.1A synchronous boost conversion output

2. 3A battery terminal synchronization switch charging

3. Support filling while placing

4. Boost efficiency up to 93%

5. 4 LED power display

6. Automatically detect phone insertion and removal

7. Double click the key to close the output, and click to open the output

8. TYPE-C supports single port input and output

9. Mobile phone charging current intelligent recognition DCP

10. Intelligent load identification automatic standby

11. Output overcurrent, overvoltage and short circuit protection

12. Input overvoltage, overcharge, overdischarge and overcurrent discharge protection

Package included:

4pcs Type-C USB 5V 2A Boost Converter