ATNSINC 12PCS Type-C USB 5V 2A Boost Converter Step-Up Power Module Mobile Power Bank Accessories with Protection LED Indicator (Type-C 5V 2A)

ATNSINC 12PCS Type-C USB 5V 2A Boost Converter Step-Up Power Module Mobile Power Bank Accessories with Protection LED Indicator (Type-C 5V 2A)

Input voltage range: 5 ~ 5.5V; Charging cut-off voltage: (4.2v/4.35v) ± 0.5%; Charging current: 2.4A ± 5%; Boost output voltage: 5V ~ 5.15v (line loss compensation); Boost output voltage ripple: 100mV; Boost output current: 2A. When the load current is less than 50mA continuously, the output will be turned off. It supports the external key, which is connected to the K point and the output negative pole. Short press to turn on the power display and turn on the 5V output. Two consecutive short presses will turn off the power display and turn off the 5V output. It supports discharging while charging. The usb-a base weldingposition is provided on the back of the product, which can be installed manually. When the battery voltage drops below 4.1V, the charging cycle starts again.

Specification:

Input voltage range: 5 ~ 5.5V

Charging cut-off voltage: (4.2v/4.35v) ± 0.5%

Charging current: 2.4a ± 5%

Boost output voltage: 5V ~ 5.15v (line loss compensation)

Boost output voltage ripple: 100mV

Boost output current: 2A

Boost conversion efficiency: 92.5% (3.6V input, 5v2a output)

Static current at battery end: < 30uA

Function introduction

- When the load current is less than 50mA continuously, the output will be turned off.

- It supports the external key, which is connected to the K point and the output negative pole. Short press to turn on the power display and turn on the 5V output. Two consecutive short presses will turn off the power display and turn off the 5V output.

- When the charging current drops to 100mA after reaching the final floating charging voltage, the charging cycle will be automatically terminated.

- When the battery voltage drops below 4.1V, the charging cycle starts again.

- When the battery voltage is lower than 2.8V, the battery will be pre charged with a current of 180mA.

- The usb-a base weldingposition is provided on the back of the product, which can be installed manually.

- It supports discharging while charging.

Package included:

12pcs 5V 2A Type C USB Black Board.