14 x 7/8" Bone White - Stitch Tek Metal to Metal Type #1 Roofing Screws - Hex Washer Head - Drill Point - 9/16" EPDM Washer. 1 x 250 Count Bag - 250

14 x 7/8" Bone White - Stitch Tek Metal to Metal Type #1 Roofing Screws - Hex Washer Head - Drill Point - 9/16" EPDM Washer. 1 x 250 Count Bag - 250

The #14 x 7/8" Screw is used to attach metal panels together along with several other uses These screws have a self drilling tip, means no unnecessary pre drilling needed to install The 9/16" EPDM washer is designed to seal the screw to the metal panel to prevent leaking The 5/16" hex head provides a solid grip on the screw for positive installation Also Used for attaching corner and rake trims and the ridge cap where they overlap wall steel 14 x 7/8 BONE WHITE - Stitch Tek Metal to Metal Type #1 Roofing Screws - Hex Washer Head - Drill Point - 9/16 EPDM washer. 1 x 250 COUNT BAG - 250 Screws

-Self drilling Type #1 Metal to Metal Stitching Screws have a 5/16" hex head with a 9/16" EPDM washer
-The #14 x 7/8" Screw is used to attach metal panels together along with several other uses
-Color on the roof screw heads is painted with a two part polyurethane for longer product life
-These screws have a self drilling tip, means no unnecessary pre drilling needed to install
-The 9/16" EPDM washer is designed to seal the screw to the metal panel to prevent leaking
-The 5/16" hex head provides a solid grip on the screw for positive installation
-Mechanical galvanized screws prevent corrosion and rusting
-Screws have been salt spray tested over 1,000 hours without product failure
-Also Used for attaching corner and rake trims and the ridge cap where they overlap wall steel


Please keep in mind when choosing the best screw color to match your roofing that differences in computer screens, in sheet metal roofing production and roofing screw production, the color you order and the color of your roofing may vary to some degree

All our metal roofing screws use EPDM Washers to seal the screw to metal roofing panel to stop leaking. Our metal roofing screws EPDM washers hold up well to ozone, temperature extremes, ultraviolet radiation, and other harsh outdoor environmental conditions. The EPDM Washer is Bonded to a Galvanized Steel Washer Prevent Sealing Issues Due to Fluctuating Temperature Ranges. Compared to Neoprene Washers, the EPDM Temperature range of -60 to 350 F is Far Superior to Neoprene washers which have a much narrower temperature range.