Nitze Camera Suction Cup Mount, with Built-in NATO Rail and Mounting Holes, 4.5" Car Suction Mount for Sony, Panasonic, Canon, Nikon, FUJIFILM, DJI,

Nitze Camera Suction Cup Mount, with Built-in NATO Rail and Mounting Holes, 4.5" Car Suction Mount for Sony, Panasonic, Canon, Nikon, FUJIFILM, DJI,

【High Load Capacity】Nitze N48-A45 4.5" camera suction mount supports 60 kg/ 132 lb of vertical suction and 40 KG/ 88lb of horizontal suction for still shooting. When the dynamic speed is up to 80 km/h, the load capacity is 3 kg/ 6.6 lb. 【3 Steps Installation】1. Removing the dust-proof cover and clean the surface. 2. Placing it to a clean, dry, flat, smooth, nonporous, and non-fragile surface. 3. Pressing the suction cup firmly and pumping the suction valve button until the white safety line is completely invisible. 【Multiple Mounting Points】The suction cup mount features a built-in NATO rail and multiple 1/4"-20 locating holes and 3/8"-16 ARRI locating holes for accessories extending. A safety pin at the end of the NATO rail prevents accidental falls. 【Wide Application】The suction cup camera mount can be attached to any clean, dry and smooth surfaces like metal/ceramic surfaces, car windscreen/windshield, flat glass door, car door, car hood, car window, etc. The suitable operating temperature range is -20°C (60°F )to -60°C (140°F). 【Note】①Doing the adsorption test without load at first. If the test fails, please contact customer service. ② Mounting it onto recommended surfaces and check it at least every 4 hours. ③Keeping the suction cup chassis and filter cotton intact and clean. If broken or dirty, stop using it immediately. ④ If the white safety line of the suction valve is exposed during use, it is necessary to pump immediately until the white line is invisible. 【High Load Capacity】Nitze N48-A45 4.5" camera suction mount supports 60 kg/ 132 lb of vertical suction and 40 KG/ 88lb of horizontal suction for still shooting. When the dynamic speed is up to 80 km/h, the load capacity is 3 kg/ 6.6 lb.