HayWHNKN 11023Lbs Pressure Pneumatic Punch Press Machine with Display Controller Die Hole Punches Adjustable Cylinder Stroke for Sheet Metal Hole

HayWHNKN 11023Lbs Pressure Pneumatic Punch Press Machine with Display Controller Die Hole Punches Adjustable Cylinder Stroke for Sheet Metal Hole

【High Accuracy】A clamp with an inner diameter of 0.98 ".It is equipped with a rotational resistance guide rods, guide plate, high accuracy, can adapt to high speed precision impact load.According to different products or mould, adjust the height, speed, stroke, and the size of the pressure and stamping time. 【Intelligent Control】It adopts microcomputer control system, you can choose manual, semi-automatic and fully automatic operation.(This model with display controller is more convenient to operate.) 【High Efficiency】Widened and enlarged work surface with 1.9 "diameter blanking hole, 4 T-slots for easy securing of items.The pneumatic press is with compressed air as power source, high efficiency and easy operation.It can be applied to manual operation integration, automated assembly line. 【Easy to Use】You can choose hands button or foot switch control, can increase the protection device, mould heating, temperature control and pressure sensors, control devices and control counter device in accordance with safety standards, ensure the safety of the operator. 【Wide Application】Booster cylinder specification 3.94inch-0.59inch/100mm-15mm.Suitable for electronics, electrical appliances, instruments, meters, cameras, watches, jewelry, hardware and garment, shoes and hats.

Parameter

Voltage:110V

Pressure11023lb/5000kg

The die hole diameter:0.98inch/2.5cm

Working Countertops Size:18.1*11.8inch/46*30cm

Outer diameter of trachea:0.39inch/1cm

Booster cylinder specification:3.94inch-0.59inch/100mm-10mm

Working air pressure:0.5-0.8MPa

Note:

1. 46# antiwear hydraulic oil should be added to the hydraulic cylinder. It is recommended to replace the hydraulic oil

after one year of use. (Due to ex-factory debugging, there will be a small amount of hydraulic oil in the machine, please prepare your own hydraulic oil after receiving the goods).

2.Check whether the machine bolts are tightened before working. If they are loose, they must be tightened before working.

Check whether the air pipe is properly connected to prevent air leakage and make the machine unable to work normally.

3. Avoid placing your hand under the punching shaft during work to avoid accidents .

4.Do not wipe the machine with a damp cloth to avoid rusting the machine .

5.When disassembling,the machine must be turned off, and standby operation is strictly prohibited to avoid personal injury .

6.The rated pressure of the air compressor is 0.8mpa. The capacity of the air compressor storage tank is about 60L,the larger the capacity, the longer the service time and the more stable it is. The displacement is optional 200L/min, the larger the displacement,    the larger the applicable machine model.

7.Note :The actual output pressure is about 80% of the theoretical pressure.