FYSETC K1 Max Build Plate - Upgrade PET Print Bed - 310x320 PEI Sheet: Smooth Textured Double Sides Flexible Spring Steel Hotbed Cover Removable 3D

FYSETC K1 Max Build Plate - Upgrade PET Print Bed - 310x320 PEI Sheet: Smooth Textured Double Sides Flexible Spring Steel Hotbed Cover Removable 3D

1. A must-have Build Plate Top Plate Only: !!!No Magentic Base Plate. Spare replacement metal heatbed cover for DIY your FDM 3d Printer stock bed: a single plate. The one smooth side and the one textured side are well double options, better than the original glass bed. The cutouts well match with Crealty K1 max ultrabase heated bed srews. 2. K1 Max 315x310 Bed Sheet: Size: 320X310mm/ 12.6*12.2 inches, large enough to cover k1 max platform. May fit: Crealiity CR-10S Pro V2 and V3 CR-X CR-10 Smart Pro, Ender 3 Max or Max Neo, Formbt Troodoon 300, Gooofooo Novaa, and Anycubiic, NOT for Ender 3 S1 Plus. If you can accept 5-10mm,may fit: build plate 320x320, 310x320 build plate, Long LK1 Anycubiic MegaX, Kywooo Tycoonn Max, and Sovoll SV04 SV07 plus, artilery Sidewinde x1 x2 SW-X1 SW-X2 etc. Better to measure 3d printer hot bed size. 3. Reference bed temperature: PLA(50-65℃/ 122℉-149℉), PETG(70-80℃/ 158-176℉), TPU(60-70℃/ 140-158℉), ABS(90-100℃/ 194-212℉, recommend on the Gold side). The textured PEI side is more friendtly with ABS. Note: Please keep nozzle not directly touch to avoid scratch or permization. Give reliable adhesion: Adjust an appropriate Z Offset is very important to get a flat first layer bed adhesion TO avoid fried noddles. And Keep Filament DRY is also a MAIN factor for a successful print journey. 4. Upgraded 320x310 Bed Adhesion Fixed: Double-sided textured PEI and "Carboon Fiber" PET platform is designed for easy replacement. When one side becomes worn or damaged, simply flip it over and utilize the other side, extending the lifespan of the platform. One more thing to note is that you need to adjust your Z-offset since each texture side is different thickness creating a different distance from the printing platform when doing a 3d printing project. 5. Ease of removal: fit for almost print material, after cooling it pops right off - even the skirt! Dual handles and positioning hold design make it easier to install and use. Makes a better bedplate and that the finish it gives the surface is very nice and more textured while being super grippy for that initial layer adhesion, and somehow allowing your prints to literally pop off the bed once you bend it. You can clean it with sope when switching between materials like PETG and PLA. What you get?
1pcs metal printing build surface-320 X 310mm, Please note: not include the magntic sticker, you can use your original or you need to prepare for yourself.

Every plate's material has its limited and advanturage, before ordering, please knowledge the plate's character.
Feature:
Easy to install: cover on your magntic pad or magntic hotbed, Once you get used to aligning the metal plate it's just as easy as glass. Also, This metal plate is friendly for a heated plate of aluminum that the added thickness retains more heat and it allows the bed to cycle less,

Easy to remove the prints: Prints come off the PEI plate with no need to pull or pry the print if you let the bed drop below 32 C. When you have not wanted to wait for the bed to cool, you can left the PEI plate off of the printer and flex it. The prints just snap off.

How to clean: First, wash thoroughly with dish soap and water, then when dry, rub it down with rubbing alcoohll (you only need to use soap and water the first time, or when switching between materials like PETG and PLA).