ELEGOO 8K Water Washable Resin 405nm LCD UV-Curing Photopolymer 3D Printer Resin Best for 12K/14K/16K Saturn Mars Jupiter LCD MSLA DLP 3D Printer

ELEGOO 8K Water Washable Resin 405nm LCD UV-Curing Photopolymer 3D Printer Resin Best for 12K/14K/16K Saturn Mars Jupiter LCD MSLA DLP 3D Printer

【Easy to clean, easy to use】 Compared to other kinds of resins, ELEGOO water washable resins are easy to use, do not need alcohol or IPA to clean, just need to clean with tap water, saving you the cost of alcohol or IPA,and save your time. 【High Precision and Low Shrinkage】ELEGOO water washable photopolymer resin is specially designed for reducing volume shrinkage during the Photocuring process ,which ensures the high precision of the print model with smooth finish. 【Fast Curing and Great Stability】ELEGOO 405nm Rapid Resin was designed to significantly reduce printing time with its excellent fluidity. Meanwhile its great stability and proper hardness ensure a unworried printing experience and successful printing. 【Low odor, non-irritating】 ELEGOO water washable resin liquid has a low odor and is non-irritating, providing a safe and comfortable experience for the user 【Wide Applications】Given the outstanding performances, ELEGOO water washable resin is suitable for most MSLA/DLP/LCD 3D printers. Works best with the resin 3D Printers.

ELEGOO photopolymer resin is a type of polymer that changes its physical properties when introduced to light. In the case of 3D printing , these are typically liquid plastic resins that harden when exposed to a light source, which works perfectly with our Photocuring resin

Usage condition :
1) Shake up the bottle before use and avoid direct sunlight and dusty environment
2) Do not drink it and keep it out of the reach of children
3) Please wear a mask and gloves when using to avoid direct skin contact and maintain indoor ventilation
4) If you got skin contact please wash away with waters immediately and if you feel discomfort please see a doctor ASAP.
5) Once the model is complete, please wash it with high 95% degree or higher ethanol alcohol for 30 seconds at least
6)If you don’t use the resin please do not leave them in the resin tank over 48 hours or put them back to its original bottle and seal it.

Material Properties :
Curing wave-length: 405 nm
Hardness: 79.0 D
Shrinkage: 7.1 %
Viscosity (25°): 552.0 mpa.s
Liquid density: 1.100 g/cm³
Solid density: 1.184 g/cm³
Tensile strength: 23.4 Mpa
Elongation at break: 14.2 %
Curing time: 6-10 s
Shelf life: 2 year