Aliarm Cordless Paint Sprayer for Ryobi One+ Plus 18V Li-ion Battery,200W HVLP Brushless Motor Handheld Paint Sprayer Gun with 4 Size Nozzles 3

Aliarm Cordless Paint Sprayer for Ryobi One+ Plus 18V Li-ion Battery,200W HVLP Brushless Motor Handheld Paint Sprayer Gun with 4 Size Nozzles 3

【Portable Cordless Paint Sprayer】Aliarm Paint sprayer is made of ABS material,Light-weight,safety use and durable. Adopting hight-powered brushless motor that is featured low noise and extend tool working time,Unlike other plug-in paint sprayer,our tool is without cord limited,you can enjoy the convenience of doing painting works indoors or outdoors,finish works smoother,significantly save your time. 【Battery Powered Paint Sprayer Gun】The 200W electric paint sprayer is 100% compatible with Ryobi One+ Plus 18-Volt lithium NiCd NiMh batteries P102, P103, P104, P105, P106, P107, P108, P109, P122 (Battery Not Included). 【Flexible and Multi-angle painting】Multi spray options help you precisely control painting area,flexible & multi-angle,easily finish the complex surface works.3 spray patterns(Horizontal,Vertical,Circle) is adjustable by loose the air cap.4 size copper nozzles (1.0mm, 1.8mm, 2.5mm, and 3.0mm),the 2.5mm nozzle is preinstalled on the spray gun. 【Operation Method】We need to dilute material according to different prime to reach optimal viscosity,fill the viscosity cup and count the time when the paint runs out.Our sprayer comes with a viscosity cup to help you ensure the paint viscosity, the viscosity is up to 40 DIN/sec,Air flow 1600ml/min.The spray width can be adjusted by the spray size knob.The flow control knob is behind the trigger,you can adjust the material flow rate according to your requirement. 【Easy Disassemble and Clean】After usage,press the release button to remove the motor, the product comes with a cleaning brush and a clogging needle,to avoid the paint hardened left to clog the nozzle part,we have to clean it immediately,then fill a bottle of water,spray for 1 minute for thoroughly cleaning. The cordless paint sprayer is comply with FCC RoHS and CE security testing standards.Built-in protective circuit board,the protective voltage is 15V,operation voltage is 16V,it automatically cuts off power below 14V to protect your battery,and prolong your battery using life.If there is any question,please contact with us,we will come back to you within 24 hours. 20V MAX Spray Gun Fully compatible with Ryobi Battery

Technical Data
Voltage 20V Max
Spray Width 200-300mm
Spraying Distance 200-250mm
Air Flow 1600ml/min
Rated Speed 4200rpm
Viscosity 40Din-sec

Packing List

1 x Paint Sprayer
1 x Cleaning Brush
1 x Cleaning Needle
1 x Viscosity Cup
4 x Nozzles
6 x Paint Filter
1 x User Manual

Application

Suitable for wall,fence,door,window,metal rust,ceiling used for car repairing etc.

Used Method
Paint Primer needs to be diluted before use
Test method after dilution,fill the viscosity cup and count the time when it flows out.

How to thin the paint
1.Preparation ---A timer,Thinner(water),mixing stick,viscosity cup,filter paper,paint,2 paint buckets
2.Filtration---using the provided white filter paper to filter the paint.
3.Stirring---Stirring thoroughly after adding a small amount of water to the filtered paint.
4.Counting the time---Fill the viscosity cup with the thinned paint and measure the flow time,it should run out in 15-25s.
5.If it takes more than 25s,please add a bit more water and test again,if less than 15s ,add some paint and retest until the time within 15-25s.

Nozzles Selection
Nozzles-----Application Material----- Projects
1.0 mm------Varnish ---------- DIY,Cabinets
1.8 mm------Furniture Paints--------- Furniture,Garage Doors,Metal
2.5 mm------Primer -------- Internal walls,fence,wooden window frame
3.0 mm------Floor Paints ------- External walls,outdoor floors
How to use the sprayer?
1.Unscrew the paint container from the spray gun.
2.Pour the material into the container ,no more than 1000ml
3.Adjusting the suction tube ,and ready to spray
4.Press the release button on the top of sprayer,and remove the motor
5.Please clean it after using with the provided brush and cleaning needle,and set aside to dry.

Sprayer Tips
1.This cordless paint sprayer is fully compatible with Ryobi One+ 18V battery(Not come with battery)
A 6 A.h battery can last 30 minutes.
20cm consistent distance spraying for better painting.
How to do if the machine does not spray or start?
1.Please check your battery is fully charged and compatible battery
2.Before spraying, the paint must be filtered and thinned to a viscosity test time of 15-25 seconds
3.Probably the nozzle is clogged,please clean it with provided brush and cleaning needle.
4.Make sure the container tighten to create suction.
5.A regular latex paint should be filtered and diluted.It may cause clogging if the latex paint is too thick .

How to do if spraying uneven,slow or stopping.
1.Probably battery is low,paint might be too thick,or the nozz